Laerdal Medical AS 150-00001 ユーザーズマニュアル
2004-10-08
11
For Remote Control to properly recognize the Simulator
1. Turn on the simulator by pressing the “On/Off” button located on the right side of the
simulator’s torso.
2. Turn on the remote control by pressing the On/Off key (indicated by the letter J in
remote control picture above). The remote control will automatically detect the
simulator and set the initial parameters accordingly. A splash screen will be displayed
for a few moments until the main display is shown.
for a few moments until the main display is shown.
Note: If an error message appears stating “no reception”, make sure that the
simulator is turned on.
Main Display
The main display screen shows the current status and is a shortcut screen for modifying
some parameters using the quick execution buttons.
The main display is divided into five functional areas and a quick execution area:
some parameters using the quick execution buttons.
The main display is divided into five functional areas and a quick execution area:
1. The upper area is the Logging and Scenario status area. The log status and clock are
presented here together with the remote control battery status and a radio reception
indicator.
2. The ECG section is indicating Running Rhythm on the first line and Waiting Rhythm on
the second line. ”Defib. Enabled” allows change to Waiting Rhythm when a defibrillator
shock is given.
shock is given.
3. The sounds section controls the selected Heart, Lung and Vocal (spoken) sounds.
Volume for each sound can be controlled individually.
4. The Blood Pressure (BP) section shows the set BP, Pulse Strength and the Korotkoff
sound volume.
5. The Breathing rate section shows the set breathing rate, airway open/close status,
supplemental oxygen “active/not active” and airway closure status (M “manual”, A
“adjuncts”, or B “Bag-Valve-Mask” setting).
“adjuncts”, or B “Bag-Valve-Mask” setting).
6. The quick execution bottom menus are shown at the bottom of each display window.
The functions of these buttons will change as the selected function area changes.