Laerdal Medical AS 150-00001 ユーザーズマニュアル
2004-10-08
33
Connecting external microphone (not supplied by Laerdal)
1. Detach chest skin.
2. Carefully lift chest compression plate away from the compression spring and gently
lay to the side being careful not to detach any wires.
3. Locate the external microphone jack on the simulator’s main circuit board.
4. Plug external microphone into this jack.
5. Reattach chest skin.
5. Reattach chest skin.
Connecting PC
1. Locate the USB connector in the cable bundle on the right side of the torso.
2. Plug in USB cable to this connector.
Connecting AC power supply
1. Locate the AC power connector in the cable bundle at the right side of the torso.
2. Plug in AC adapter cable to this connector.
3. Plug in wall adapter to wall outlet (110 – 240V AC).
3. Plug in wall adapter to wall outlet (110 – 240V AC).
Attach the BP Arm
1. Detach chest skin
2. Carefully lift chest compression plate away from the compression spring and gently
2. Carefully lift chest compression plate away from the compression spring and gently
lay to the side being careful not to detach any wires
3. Place BP Arm and cable into the arm hole of the simulator’s torso
4. Connect the arm via the bolt by “clicking” it into place making sure the grooves on
4. Connect the arm via the bolt by “clicking” it into place making sure the grooves on
the bolt fit properly to the hole on the torso.
5. Plug in the wire from the BP Arm to the wire that extends out from circuit board’s
BP jack.
6. Reattach chest skin
Connecting the IV Arm
Connect the IV Arm via the bolt by “clicking” it into place making sure the grooves on the
bolt fit properly to the hole on the torso.
Proper care of IV Arm
IV Arm – Multiple Venipuncture sites:
• Dorsal Veins of Hand (3)
• Antecubital
-
Cephalic Vein
-
Median Vein
-
Basilic Vein
1. Attach IV bag to IV tubing.
2. Attach IV tubing to either vein.
2. Attach IV tubing to either vein.
3. Allow fluid to flow through arm and out other vein.