My Music Group Limited E41 ユーザーズマニュアル
TRUE WIRELESS EARBUDS
TWE paring
1. Keep the distance between the device and the Bluetooth Earbuds within 3 feet(for pairing
only)
2. Press and hold the multi-function button on both earbuds for a few seconds until you hear
prompt “ Power on”, and see blue lights flashing.
3. You will hear prompt ”Left Channel” on Left Earbud and “ Right Channel” on Right Earbud to
begin pairing.
Connect TWE to your device
Active the Bluetooth function on your device to search for “E41” and connect to it. You will hear ”
Phone paired” from the Master Earbud(Right Earbud-Factory default setting), and blue lights
flashing. It is ready for use.
POWER OFF
Option 1: Long press the Multi-function button for about 4 seconds, hear ”Power off”, the both
earbuds will turn off.
Option 2: Put earbuds into charging case and it will be charged automatically. Both earbuds will
turn off during charging.
HANDS FREE FUNCTION
Short press the multi-function button to answer an incoming call / end an ongoing call;
Long press the multi-function button to refuse an incoming call
Double press the multi-function button to call the number that last called you
REMARK: the operation only support master earpiece.
SINGEL EARBUD PAIRING
1. Press and hold the multi-function button for about 6 seconds, until you hear “ Power on” then
“Pairing”, the blue/red lights flash quickly. (the other Earbud should be off during this process.)
2. Active the Bluetooth function on your device to search the “E41” and connect to it.
3. You will hear prompt” Phone paired” and blue lights flashing. It is ready for use.
1. Keep the distance between the device and the Bluetooth Earbuds within 3 feet(for pairing
only)
2. Press and hold the multi-function button on both earbuds for a few seconds until you hear
prompt “ Power on”, and see blue lights flashing.
3. You will hear prompt ”Left Channel” on Left Earbud and “ Right Channel” on Right Earbud to
begin pairing.
Connect TWE to your device
Active the Bluetooth function on your device to search for “E41” and connect to it. You will hear ”
Phone paired” from the Master Earbud(Right Earbud-Factory default setting), and blue lights
flashing. It is ready for use.
POWER OFF
Option 1: Long press the Multi-function button for about 4 seconds, hear ”Power off”, the both
earbuds will turn off.
Option 2: Put earbuds into charging case and it will be charged automatically. Both earbuds will
turn off during charging.
HANDS FREE FUNCTION
Short press the multi-function button to answer an incoming call / end an ongoing call;
Long press the multi-function button to refuse an incoming call
Double press the multi-function button to call the number that last called you
REMARK: the operation only support master earpiece.
SINGEL EARBUD PAIRING
1. Press and hold the multi-function button for about 6 seconds, until you hear “ Power on” then
“Pairing”, the blue/red lights flash quickly. (the other Earbud should be off during this process.)
2. Active the Bluetooth function on your device to search the “E41” and connect to it.
3. You will hear prompt” Phone paired” and blue lights flashing. It is ready for use.
NOTE:
Factory default setting is RIGHT Earbud as MASTER Earbud. To reset/change MASTER
Earbud, hold multi-function button on BOTH earbuds for 6 seconds. When blue/red
lights flash quickly, press multi-function button twice on the earbud you want to set as
the MASTER Earbud.
Factory default setting is RIGHT Earbud as MASTER Earbud. To reset/change MASTER
Earbud, hold multi-function button on BOTH earbuds for 6 seconds. When blue/red
lights flash quickly, press multi-function button twice on the earbud you want to set as
the MASTER Earbud.