Huawei Technologies Co. Ltd TE80 ユーザーズマニュアル
HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Administrator Guide
6 Conference
Issue 02 (2014-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
69
Parameter
Description
Setting
the endpoint to register.
If you set this parameter to the Lync
Server domain name, enable the domain
name server (DNS). If the DNS is not
enabled, enable Proxy server.
Server domain name, enable the domain
name server (DNS). If the DNS is not
enabled, enable Proxy server.
Example 2: lync.zdtest.com
Conference
service
number
service
number
-
You do not need to set this
parameter.
parameter.
Enable
proxy server
proxy server
-
You do not need to set this
parameter.
parameter.
Proxy server
address
address
-
You do not need to set this
parameter.
parameter.
Site number
Specifies the site number for your
endpoint.
endpoint.
If your endpoint registers with a Lync
Server, endpoints that also register with
the Lync Server can dial this site number
to call your endpoint.
Server, endpoints that also register with
the Lync Server can dial this site number
to call your endpoint.
Example: 123@zdtest.com
Obtain this value from the Lync
Server administrator.
Server administrator.
User name
Password
Specifies the user name for
authentication registration.
authentication registration.
Example: lync_1@zdtest.com
Obtain the value of this
parameter from the Lync Server
administrator.
parameter from the Lync Server
administrator.
Server type
Specifies the SIP server type.
OCS: Select this option if your
endpoint registers with the Microsoft
Office Communications Server
(OCS) or Microsoft Lync Server.
endpoint registers with the Microsoft
Office Communications Server
(OCS) or Microsoft Lync Server.
CISCO VCS: Select this option if
your endpoint registers with the Cisco
TelePresence Video Communication
Server (VCS).
your endpoint registers with the Cisco
TelePresence Video Communication
Server (VCS).
Standard: Select this option if your
endpoint registers with other SIP
servers.
endpoint registers with other SIP
servers.
Set this parameter to OCS.
Transmissio
n type
n type
Specifies the protocol used for SIP
signaling transmission.
signaling transmission.
TCP: Use the Transmission Control
Protocol (TCP) to implement
transmission reliability.
Protocol (TCP) to implement
transmission reliability.
UDP: Use the User Datagram
Protocol (UDP) to implement
transmission with reduced latency.
Protocol (UDP) to implement
transmission with reduced latency.
TLS: Use Transport Layer Security
(TLS) to implement transmission
security.
(TLS) to implement transmission
security.
Only TCP and TLS
transmission are supported.
transmission are supported.