Huawei Technologies Co. Ltd DC750 ユーザーズマニュアル
One coaxial cable
DC750 High Definition Digital Transport Adapter
One HD-uDTA
Quick Start
One power adapter
Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse
engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses.
The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse
engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses.
Two AAA batteries
One Quick Start
Quick Start
Issue: 01 (2011-10-15) Part Number: 96720718
Notice
Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus
the descriptions herein may not exactly match the product or its accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation.
the descriptions herein may not exactly match the product or its accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software
and technical data therein.
and technical data therein.
LICENSE NOTICE
& TRADEMARK ACKNOWLEDGEMENT
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
COPYRIGHT NOTICE AND WARRANTY DISCLAIMER
This product includes free software NetBSD bcopy.S,v 1.8.2.1 owned by Carnegie Mellon University and released under the license which can be found at http://www.cs.cmu.edu/~410/licenses.html.
Mach Operating System Copyright © 1993 Carnegie Mellon University All Rights Reserved.
This product includes free software ZLib 1.2.3 owned by Jean-loup Gailly and Mark Adler and released under the Zlib License which can be found at http://www.opensource.org/licenses/zlib-license.php.
Copyright © 1995-2005, Jean-loup Gailly and Mark Adler.
Mach Operating System Copyright © 1993 Carnegie Mellon University All Rights Reserved.
This product includes free software ZLib 1.2.3 owned by Jean-loup Gailly and Mark Adler and released under the Zlib License which can be found at http://www.opensource.org/licenses/zlib-license.php.
Copyright © 1995-2005, Jean-loup Gailly and Mark Adler.
WARRANTY DISCLAIMER
All open source software are provided by their respective copyright holders and contributors on an “as is” basis, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this
software.
software.
06 Using the HD-uDTA for the First Time
Step 2
Back of TV
2
4
3
Step 3
7
5
Back of TV
6
9
8
06 Using the HD-uDTA for the First Time
1. Disconnect the coaxial cable currently connected to
the TV set.
2. Connect the coaxial cable to the Cable In port on the
back of the HD-uDTA.
3. (Optional) Connect one end of the short coaxial cable
(provided in the kit) to the Cable ln or RF In port on the
back of TV set.
4. (Optional) Connect the other end of the short coaxial
cable to the To TV port on the back of the HD-uDTA.
5. Connect one end of an HDMI cable to the HDMI In port
on the back of the TV set.
6. Connect the other end of the HDMI cable to the HDMI
port on the back of the HD-uDTA.
7/8. (Optional) Set the TV and the HD-uDTA to the same
channel.
9. Connect the power adapter (provided in the kit) to the
+5V DC In port of the HD-uDTA.
10. Connect the power adapter to a working power
socket, extension cord or surge protector.
the TV set.
2. Connect the coaxial cable to the Cable In port on the
back of the HD-uDTA.
3. (Optional) Connect one end of the short coaxial cable
(provided in the kit) to the Cable ln or RF In port on the
back of TV set.
4. (Optional) Connect the other end of the short coaxial
cable to the To TV port on the back of the HD-uDTA.
5. Connect one end of an HDMI cable to the HDMI In port
on the back of the TV set.
6. Connect the other end of the HDMI cable to the HDMI
port on the back of the HD-uDTA.
7/8. (Optional) Set the TV and the HD-uDTA to the same
channel.
9. Connect the power adapter (provided in the kit) to the
+5V DC In port of the HD-uDTA.
10. Connect the power adapter to a working power
socket, extension cord or surge protector.
Wait for the HD-uDTA to start and search for channels.
You are now ready to watch programs.
Power on the HD-uDTA and the TV.
a. (Optional) Adjust the audio/video mode of the TV.
a. (Optional) Adjust the audio/video mode of the TV.
The method varies with TV types. Typically, you can press the
TV/AV key on the TV remote control.
b. (Optional) Tune the TV and the HD-uDTA to the same channels.
Tune the TV to channel 3 or channel 4.
Set the Ch3/Ch4 switch to Ch3 if you have tuned the TV
to channel 3 and Ch4 if you have tuned the TV to channel 4.
Step 4
01 Packing List
One remote control
One HDMI cable(optional)
Welcome to use DC750 High Definition Digital Transport Adapter (HD-uDTA for short)!