Huawei Technologies Co. Ltd E153U-65 ユーザーズマニュアル

ページ / 2
Thank you for choosing the Mobile Broadband USB 
Stick. With your USB Stick, you can access a wireless 
network at high speed.   
Note: 
This manual describes the appearance of the USB Stick, as well as the procedures for 
preparation, installation, and removal. For operation details about the management 
program, see the online help included in the management program. 
 
Getting to Know Your USB Stick 
The following figure shows the appearance of the USB Stick. It is provided only for your 
reference. The actual product may be different. 
 
1
2
3
5
4
 
 
n
 
USB Connector 
It connects the USB Stick to a PC. 
o
 
Strap Hole 
You can tie the cap and the USB Stick together by threading a strap through the strap holes, 
so that the cap will not be easily lost. 
 
 
p
 
Indicator 
It indicates the status of the USB Stick. 
z
 
Green, blinking twice every 3s: The USB Stick is powered on. 
z
 
Green, blinking once every 3s: The USB Stick is registering with a 2G network. 
z
 
Blue, blinking once every 3s: The USB Stick is registering with a 3G/3G+ network. 
z
 
Green, solid: The USB Stick is connected to a 2G network. 
z
 
Blue, solid: The USB Stick is connected to a 3G network. 
z
 
Cyan, solid: The USB Stick is connected to a 3G+ network. 
z
 
Off: The USB Stick is removed. 
 
q
 
MicroSD Card Slot 
It holds a microSD card.   
 
r
 
SIM/USIM Card Slot 
It holds a Subscriber Identity Module (SIM)/Universal Subscriber Identity Module (USIM) 
card. 
 
Getting Your USB Stick Ready 
1.  Slide the back cover to remove it from the USB Stick.   
2.  Insert the SIM/USIM card and the microSD card into the corresponding card slots, as 
shown in the following figure.   
3.  Replace the back cover and slide it into place. 
 
 
Note:  
z
 
The microSD card is an optional accessory. If it is not provided in the package, you can 
buy one yourself. 
z
 
Ensure that the beveled edge of the SIM/USIM card is properly aligned with that of the 
SIM/USIM card slot and the microSD card is inserted according to the direction as 
labeled on the microSD card slot.