Viewsonic Pro9500 PRO9500 ユーザーズマニュアル

STACK menu settings

240

ViewSonic 

Pro9500

NOTE  • When DUAL is selected for LAMP MODE, the images projected 

from the Main and Sub projectors may be different. It is recommended to set 

the projectors as follows.

-  Set the same image for TEMPLATE and START UP on the Main and Sub 

projectors.

-  Capture the same image for MyScreen on the Main and Sub projectors.

-  Save the same image on MY IMAGE on the Main and Sub projectors.

-  Set the same message content for the Messenger function (Network Guide → 

Messenger Function) on the Main and Sub projectors.

• When DUAL is selected for LAMP MODE, image shift can result in image 

quality degradation on the screen.  Perform the MIRROR setting before 

adjusting the image position as the image position will change when the 

MIRROR setting is changed. (Operating Guide → SETUP menu) 
• When ALTERNATE is selected and an error occur on the projector in 

operation causing the lamp to turn off, the other projector will automatically start 

to operate.  However, if the RS-232C cable is disconnected or AC power is not 

supplied, the other projector will not turn on.
• In cases when PIN LOCK or TRANSITION DETECTOR on both projectors 

is set to ON (Operating Guide → SECURITY menu), the two projectors will 

not turn on even if ALTERNATE is selected.  Enter the security code on both 

projectors and one of the projectors will turn on.
• When Intellectual Stack is in use, the 

POWER indicator on the control 

panel of the projector operates differently than normal. (Operating Guide → 

Troubleshooting)  When the Main and Sub projectors are in standby mode, the 

Main projector determines which projector to turn on according to the STACK 

MODE setting if the 

STANDBY/ON button on the remote control or control 

panel of the Main projector is pressed.

-  The 

POWER indicator on the Main projector blinks in green while the Main 

projector determines which projector to turn on.

-  If the Main projector is turned on, the 

POWER indicator on the Main projector 

turns to steady green after lighting up, as per normal.

-  If the Sub projector is turned on, the 

POWER indicator on the Main projector 

lights in orange after the Sub projector is turned on.

-  If an error occurs on the Main projector, the Sub projector turns on and the 

POWER indicator on the Main projector lights or blinks in red.