Huawei Technologies Co. Ltd WS322 ユーザーズマニュアル
Quick Start Guide
WS322 300Mbps Mini
Wireless Router
Huawei Technologies Co., Ltd.
1
2
Hardware Specifications
Working Modes
Item
Status
Description
Status
indicator
Off
The WS322 is powered off or faulty.
Blinking Blinking red: the WS322 is powering on.
Blinking blue: the WS322 is connecting to the network.
Steady
on
Steady red: the WS322 is working properly but is not
connected to any network.
Steady blue: the WS322 is connected to the network.
Signal
strength
indicator
Off
The WS322 is not connected to any network.
Blinking The WS322 is changing its working mode.
Steady
on
The WS322 is connected to a network. The lightened
indicator bars indicates the network signal strength. Three
bars mean the network signals are strong, while one bar
means the network signals are weak.
WPS
button
/
Quickly sets up a wireless connection or changes WS322's
working mode.
Reset
button
/
Restores the WS322 to its factory settings. When the
WS322 is powered on, use a sharp object to push and hold
this button for 1 second or more to restore the WS322 to its
default settings.
3
Setting the Computer's IP Address
Procedure on Computers Running Windows 7
1.
Choose
Start > Control Panel >
Network and Internet >
Network and Sharing Center.
2.
Choose
Change adapter
settings > Local Area
Connection. Right-click Local
Area Connection, and choose
Properties.
Procedure on Computers Running Windows XP
1.
Choose
Start > Control Panel >
Network and Internet
Connections.
2.
Choose
Network Connections
>
Local Area Connection.
Right-click
Local Area
Connection,and choose
Properties.
WiFi Router Mode That Helps You Establish a Private Access Point
WiFi Repeater Mode That Expands the WLAN Coverage
WiFi Client Mode That Provides Internet Access for Devices
Without the WLAN Function
3.
Double-click
Internet Protocol (TCP/IP).
4.
Click
Use the following IP address and Use the following DNS
server addresses. Set IP address to 192.168.33.x (any integer
ranging from 2 to 252),
Subnet mask to 255.255.255.0, and Preferred
DNS server to 192.168.33.1, and click OK.
Procedure on Computers Running Windows 7
4
Setting Up a Wireless Connection
1.
Choose
Start > Control Panel >
Network and Internet >
Network and Sharing Center >
Change adapter settings.
Right-click
Local Area
Connection, and choose
Connect/Disconnect.
2.
From the wireless network list,
choose the WS322's SSID, and
click
choose the WS322's SSID, and
click
Connect.
3.
Enter the key, and click
OK.
4.
After the key is verified,
Connected is displayed on the
right of the network icon,
indicating that the WS322 and
computer are wirelessly
connected.
indicating that the WS322 and
computer are wirelessly
connected.
Procedure on Computers Running Windows XP
1.
Choose
Start > Control Panel >
Network and Internet
Connections > Network
Connections. Right-click
Wireless Network Connection,
and choose
View Available
Wireless Networks.
2.
From the wireless network list,
choose the WS322's SSID, and
click
choose the WS322's SSID, and
click
Connect.
3.
Enter the key and click
OK.
4.
After the key is verified,
Connected is displayed on the right of the
network icon, indicating that a wireless connection has been set up
between the computer and WS322.
between the computer and WS322.
For the WS322's default SSID and key, see the label on its casing.
Signal strength indicator
Reset button
In this mode, the WS322 is connected to the Internet through its Ethernet
port and works as a WiFi access point in a home, providing Internet access
for wireless clients, such as phones and computers.
To set up a wireless connection, press and hold the WS322's WPS button
more than 1 second and less than 2 seconds, and press the wireless
client's WPS button within 2 minutes. When the connection is set up, the
WS322's status indicator turns from blinking to steady on.
To change WS322 into WiFi Router mode, press and hold the WS322's
WPS button more than 4 second and less than 6 seconds. Then release the
WPS button when you see a signal strength indicator blinking. The WS322
will restart and change into WiFi Router mode.
port and works as a WiFi access point in a home, providing Internet access
for wireless clients, such as phones and computers.
To set up a wireless connection, press and hold the WS322's WPS button
more than 1 second and less than 2 seconds, and press the wireless
client's WPS button within 2 minutes. When the connection is set up, the
WS322's status indicator turns from blinking to steady on.
To change WS322 into WiFi Router mode, press and hold the WS322's
WPS button more than 4 second and less than 6 seconds. Then release the
WPS button when you see a signal strength indicator blinking. The WS322
will restart and change into WiFi Router mode.
In this mode, the WS322 is wirelessly connected to the Internet, providing
Internet access for wireless clients, such as phones and computers.
This mode is used to expand the existing access point or router's signal
coverage.
To set up a wireless connection, press and hold the WS322's WPS button
more than 1 second and less than 2 seconds, and press the access point
device's WPS button within 2 minutes. When the connection is set up, the
WS322's status indicator turns from blinking to steady on.
To change WS322 into WiFi Repeater mode, press and hold the WS322's
WPS button more than 6 second and less than 8 seconds. Then release
the WPS button when you see two signal strength indicators blinking. The
WS322 will restart and change into WiFi Repeater mode.
Internet access for wireless clients, such as phones and computers.
This mode is used to expand the existing access point or router's signal
coverage.
To set up a wireless connection, press and hold the WS322's WPS button
more than 1 second and less than 2 seconds, and press the access point
device's WPS button within 2 minutes. When the connection is set up, the
WS322's status indicator turns from blinking to steady on.
To change WS322 into WiFi Repeater mode, press and hold the WS322's
WPS button more than 6 second and less than 8 seconds. Then release
the WPS button when you see two signal strength indicators blinking. The
WS322 will restart and change into WiFi Repeater mode.
In this mode, the WS322 is connected to a client, such as set-top box (STB)
or computer, through its Ethernet port, providing the client with wireless
access to a wireless access point or router.
To set up a wireless connection, press and hold the WS322's WPS button
more than 1 second and less than 2 seconds, and press the access point
device's WPS button within 2 minutes. When the connection is set up, the
WS322's status indicator turns from blinking to steady on.
To change WS322 into WiFi Client mode, press and hold the WS322's WPS
button more than 8 second and less than 10 seconds. Then release the
WPS button when you see three signal strength indicators blinking. The
WS322 will restart and change into WiFi Client mode.
or computer, through its Ethernet port, providing the client with wireless
access to a wireless access point or router.
To set up a wireless connection, press and hold the WS322's WPS button
more than 1 second and less than 2 seconds, and press the access point
device's WPS button within 2 minutes. When the connection is set up, the
WS322's status indicator turns from blinking to steady on.
To change WS322 into WiFi Client mode, press and hold the WS322's WPS
button more than 8 second and less than 10 seconds. Then release the
WPS button when you see three signal strength indicators blinking. The
WS322 will restart and change into WiFi Client mode.
Figures in this guide are provided for your reference only. The
actual product may vary.
Status indicator
WPS button
3.
Double-click
Internet Protocol Version 4 (TCP/IPv4).
4.
Click
Use the following IP address and Use the following DNS
server addresses. Set IP address to 192.168.33.x (any integer
ranging from 2 to 252),
Subnet mask to 255.255.255.0, and Preferred
DNS server to 192.168.33.1. Then click OK.
Procedure on Computers Running Windows 7
Issue: 96721726 _01