HIMS International Corporation H418B ユーザーズマニュアル

ページ / 541
 
3.2.13 Abbreviations 
You can turn the translation of acronyms on/off in Braille Sense U2 MINI. 
For example, when the Braille Sense U2 MINI reads “Ala” it announces 
“Alabama”. But if using “Abbreviations” set to ‘Off’, it will announce “Ala”. 
To change the setting value, follow these steps below. 
 
(1) Move to the “Global option” by pressing short cut key, “o (dots 1-3-
5)” or navigating key in the main program. 
(2) The short cut key is “a (dot 1).” Press the short cut key or move to 
the “Abbreviations” by pressing “Space-4”.   
(3) The default setting is “On”. By pressing “Space” to change to “Off”. 
(4) Pressing “Enter” key allows you to change and save the setting. 
 
3.2.14 Voice Volume 
 
You can set the volume level of the voice on the Braille Sense U2 MINI. 
The shortcut key is “l (dots 1-2-3).” The setting value is 1 through 10 with 
the default set on 6. When you have set this option to 1, the volume will 
be set at the lowest level. If you set this option to 10, the volume is the 
loudest. If you set the volume level to 1, you will almost not be able to 
hear. The “Space” key increases the volume and the “Backspace” key 
decreases the volume by one number at a time. Please note that if you 
are at volume level 10, and increase the volume by one, the volume 
loops back to level 1. The same is true if you are at level 1, and 
decrease the volume by one unit. You will then be at level 10. Without 
opening the “Global options”, you can increase the volume with the key 
combination of the “Backspace” and “F4” keys or you can decrease it 
with the “Backspace” and the “F1” key. 
 
If you have changed the setting, press “Enter” key to save the setting. 
You can also “tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)” to the 
“Confirm” button, and press “Enter.” If you do not want to save the 
setting, “tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)” to the “Cancel” 
button, and then press “Enter.” You can also cancel saving the setting by 
pressing “Space-z (dots 1-3-5-6)” or “Space-e (dots 1-5).”