Sensors & Software Inc. NG250 ユーザーズマニュアル

Noggin

Appendix F - Using the PXFER Cable and WinPXFER Software

F-4

It is vital that WinPXFER be configured properly for the type of PXFER cable (see F1.2: p.F-2).  If
the PXFER cable is a Normal cable, the Turbo option under Preferences should NOT be checked
when attempting to transfer data.  If the PXFER cable is a Turbo cable, the Turbo option under
Preferences should be checked when attempting to transfer data.   

Noggin Mode: The DVL needs to be configured for the type of PXFER cable being used (see
F1.2: p.F-2).  In Noggin mode, select 4 - Transfer Setup from the Noggin main menu.  The
choices are Normal and Turbo.

 Mode: The DVL needs to be configured for the type of PXFER cable being used

(see F1.2: p.F-2).  In Noggin

 mode, select 4 - Utilities from the Noggin

 main menu and

then Transfer Mode.  The choices are Normal and Turbo.

Once the parallel XFER cable is connected and the WinPXFER software is installed and running
(see above), it is now possible to transfer all data buffer files to the external computer.

On the DVL, from the main menu, select number 2 – TRANSFER ALL BUFFERS.

The data will be transferred from the DVL to the computer and saved in the current working
directory.  The progress of the data transfer will be displayed on the DVL screen and the external
computer.

When the data transfer is complete, on the external computer, exit from the WinPXFER program.
Press any button on the DVL to return to the main menu.