Sensors & Software Inc. NG250 ユーザーズマニュアル
Noggin
11-Locate & Mark Mode
53
11.2 Scanning Screen
After pressing the Scan button, wait a few seconds for the vertical depth scale to appear on the
right side of the screen, and then push the Cart forward.
right side of the screen, and then push the Cart forward.
A cross-sectional image of the ground scrolls onto the screen from the right to left. The position
is displayed on the horizontal axis at the top while the depth is displayed on the vertical axis. The
position and depth axes units are meters or feet depending on the units set in the Systems
Setting Screen (Section 3.2).
is displayed on the horizontal axis at the top while the depth is displayed on the vertical axis. The
position and depth axes units are meters or feet depending on the units set in the Systems
Setting Screen (Section 3.2).
If the Scale or Both option is selected (Section 3.2), horizontal depth lines appear on the image to
assist with determining the depth of targets.
assist with determining the depth of targets.
Approximately 16 meters or 50 feet of data is displayed on one screen. If the survey line
exceeds this distance the image will scroll off the left side of the screen.
exceeds this distance the image will scroll off the left side of the screen.
To save the current screen image to file, press the Camera button on the Display Unit. The
image number appears on the bottom of the screen with a message to press any button to
continue.
image number appears on the bottom of the screen with a message to press any button to
continue.
A message will appear on the screen if there is no Compact Flash card in the Display Unit.
Images are only saved when a card is present.
Images are only saved when a card is present.
Pressing any of the number buttons on the Display Unit marked 1 to 8 while scanning adds a
numbered marker at the current position.
numbered marker at the current position.