Tarus Products Inc REMOTEASSM ユーザーズマニュアル
PENDANT CONTROL
The PENDANT CONTROL (or remote pendant) is used to operate the machine away
from the trackball station or keyboard. Manual machine movement (JOGGING), and
CNC cutting (Cycle start and Abort) are performed from the remote pendant. The remote
pendant consists of the following:
The PENDANT CONTROL (or remote pendant) is used to operate the machine away
from the trackball station or keyboard. Manual machine movement (JOGGING), and
CNC cutting (Cycle start and Abort) are performed from the remote pendant. The remote
pendant consists of the following:
1)
THREE JOG PADDLES (one for each axis)
2)
TEN PUSH BUTTONS
3)
FEED POTENTIOMETER (Feed pot)
4)
SPINDLE R.P.M POTENTIOMETER (Spindle pot)
When you first look at the remote pendant, you might be
confused because none of the buttons are labeled. Don't get
discouraged because the SCREEN is where all the button
descriptions are given. Look at the graphic illustration of
the pendant on screen to see what the buttons represent.
JOGGING THE MACHINE
The machine is always in the jog mode while the axis
drives are on. The hand wheels are also active at this time.
To make the machine move, push any one of the “jog
paddles”. The feedrate can be adjusted using the “feed pot”.
Below the pendant, there is the option to adjust the
Maximum Jog Speed (feedrate). The feedrate can be set
from 3% of maximum to 100%. Pick or highlight the
percentage of maximum that you want the machine to move.
JOG SPEED = 3% 25% 50% 100%
The feedrate is infinitely variable UP TO the maximum jog speed with the feed pot.
Pushing the jog paddles will make the machine move. It is best to start moving the
machine around slowly until you have become familiar with how the machine accelerates
and de-accelerates.
JOG SPEED = 3% 25% 50% 100%
The feedrate is infinitely variable UP TO the maximum jog speed with the feed pot.
Pushing the jog paddles will make the machine move. It is best to start moving the
machine around slowly until you have become familiar with how the machine accelerates
and de-accelerates.
JOG
To JOG the machine the DRIVES must be ON. With the drives on, the prompt (ICON)
in the lower right hand corner of the screen will indicate that the machine is in the JOG
MODE. Simply move the jog paddle on the remote pendant (the axes are displayed for
which paddle jogs which axis) and the machine will move. Turning the FEEDPOT (right
hand pot on pendant) can infinitely vary the feedrate at which the machine jogs. The
maximum feedrate is set to the system max feed.
in the lower right hand corner of the screen will indicate that the machine is in the JOG
MODE. Simply move the jog paddle on the remote pendant (the axes are displayed for
which paddle jogs which axis) and the machine will move. Turning the FEEDPOT (right
hand pot on pendant) can infinitely vary the feedrate at which the machine jogs. The
maximum feedrate is set to the system max feed.
X
Y
Button #1
Button #3
Button #5
Button #7
Button #9
Button #2
Button #4
Button #6
Button #8
Button #10
Z
Spindle
pot
Feed
Pot
JOG PADDLES