Vivato Inc. VLJ24WFSW ユーザーズマニュアル
Vivato 2.4 GHz Wi-Fi Switch User Guide
129
Command Line Interface
Enable Level Command Descriptions
path-cost interface <ethernet 0-3|wirless 1-13> <0-65535>
Enter the path cost for a specific interface on this bridge. The spanning tree algorithm adds
this value to the root cost in configuration messages that are received on this port, and is
used to determine the path cost to the root through this interface.
this value to the root cost in configuration messages that are received on this port, and is
used to determine the path cost to the root through this interface.
Larger path cost values can result the LAN accessed through this interface to be lower in
the spanning tree topology. This can result in less through traffic through this port. You
should assign a large path cost to a LAN that has a lower bandwidth or where you want to
minimize LAN traffic.
the spanning tree topology. This can result in less through traffic through this port. You
should assign a large path cost to a LAN that has a lower bandwidth or where you want to
minimize LAN traffic.
port-priority <ethernet 0-3|wirless 1-13> <0-255>
Enter the port priority for a specific port on the bridge. The port priority is used in the
spanning tree protocol to determine which port to use when a bridge has two ports
connected to the same network; resulting in a loop. The port with the lower priority number
is used.
spanning tree protocol to determine which port to use when a bridge has two ports
connected to the same network; resulting in a loop. The port with the lower priority number
is used.
priority <0-65535>
The bridge priority is used to determine which bridge to use for the root bridge and which
to use for the designated bridge. In general, a lower the bridge priority number results in the
bridge being selected as the root bridge or a designated bridge.
to use for the designated bridge. In general, a lower the bridge priority number results in the
bridge being selected as the root bridge or a designated bridge.
shutdown
Disable the bridge interface.
no shutdown
Re-enable the bridge interface.
stp
Enable spanning tree protocol (STP) on this bridge.
no stp
Disable spanning tree protocol on this bridge.
show <text>
See
shutdown
Disable the bridge.