Vivato Inc. VLJ24WFSW ユーザーズマニュアル

Part of configuring the Wi-Fi Switch involves entering the extended service set identifier (ESSID) 
for each wireless interface. This is the name that is displayed on your client’s list of available Wi-Fi 
networks. The following conditions must be present for the ESSID to be displayed on your client’s 
network list.

The Wi-Fi Switch’s power LED must indicate that the switch is operating. See 

on page 17.

The Wi-Fi Switch’s wireless interfaces must be enabled and their ESSID specified. If only 
a portion of the wireless interfaces have been enabled, the Vivato Wi-Fi Switch will not be 
transmitting through its entire 100° pattern. See 

To ensure access, the client should be within the antenna pattern of the Wi-Fi Switch. See 

Your Wi-Fi client is configured and working correctly. Refer to your client’s documentation.

The physical orientation of the client can have a direct effect on Wi-Fi operation, due to the 
variance in the antenna designs of clients. Studies have shown that rotating the client can 
significantly change the level of received signal in some cases. 

If you are in an area that is partially blocked from the Wi-Fi Switch’s antenna pattern, try 
rotating the client 90 degrees (horizontally) to see if your reception is improved.