Vivato Inc. VLJ24WFSW ユーザーズマニュアル
32
Vivato 2.4 GHz Wi-Fi Switch User Guide
Outdoor Wi-Fi Switch Installation
Mounting the Outdoor Wi-Fi Switch
Accessing Power and Data Connections in the Wi-Fi Switch
The junction box at the bottom of the Wi-Fi Switch provides access to power and data
connections. A front and a bottom cover are used to maximize access to the junction box. Data
connections are accessed by reaching through the junction box into the enclosure (see below).
A chassis grounding bolt and nuts are provided on one of the mounting pads for grounding the
enclosure, but this connection must not be used as a substitute for the power ground connection
inside the junction box.
connections. A front and a bottom cover are used to maximize access to the junction box. Data
connections are accessed by reaching through the junction box into the enclosure (see below).
A chassis grounding bolt and nuts are provided on one of the mounting pads for grounding the
enclosure, but this connection must not be used as a substitute for the power ground connection
inside the junction box.
Figure 19—
Accessing Data and Mains Power Connections
Conduit clamp
knockouts for
power and data
cabling.
knockouts for
power and data
cabling.
Data Connections (Inside)
You can remove the junction box
front cover for greater access (12
nuts, lock washers, and flat
washers).
front cover for greater access (12
nuts, lock washers, and flat
washers).
Remove the 10 bottom cover nuts, lock
washers, and flat washers to remove the
cover and reach through to the data
connections.
washers, and flat washers to remove the
cover and reach through to the data
connections.
Fu
se
ON/OFF
GBICS
RJ-45
Ethernet
110-240 VAC, 50-60 Hz
L2
L1
Power LED
This “pig tail”
power cord is
pre-installed.
power cord is
pre-installed.
Connect your
power wiring
to the L1, L2,
and GND lugs
as shown.
power wiring
to the L1, L2,
and GND lugs
as shown.
GND
Chassis Grounding Bolt and Nuts
Front View
Bottom View