Vivato Inc. VLJ24WFSW ユーザーズマニュアル

Enter the information in the Setup Type screen (shown below) and select Continue to continue to the 
Read Password settings. Continue to fill in the requested information on each screen until all of the Quick 
Setup screens have been configured and the Wi-Fi Switch is rebooted using the new settings. It is 
important that you do this before proceeding to change any other configuration settings when you first 
configure the Vivato Wi-Fi Switch. 

The titles for each of the Quick Setup screens are highlighted as settings are completed on those screens.

The Quick Setup screens are displayed automatically the first time you access the configuration web 
pages, and each time after that until your configuration has been saved at least once. To access the Quick 
Setup screens at a later time, select Quick Setup on the Home configuration page.

The settings made on the Quick Setup screens can be used to configure a local Wi-Fi Switch or a 
remote Wi-Fi Switch. This can reduce the need to log into other Switch’s configuration web pages 
when configuring more than one Wi-Fi Switch. 

Quick Setup Type: Select “local” to send the Quick Setup settings to the Wi-Fi Switch you are 
currently connected to. Select “remote” to configure another Wi-Fi Switch. Remote 
configuration requires you to enter the enable password of the other Wi-Fi Switch.

Configure Remote Switch Settings : When configuring a remote Wi-Fi Switch, enter the IP 
address, the user name, and the enable password of that Switch. All configuration settings 
made using the Quick Setup pages will be sent to the specified Wi-Fi Switch when it is 
rebooted at the end of the quick setup process.