Vivato Inc. VLJ24WFSW ユーザーズマニュアル
Vivato 2.4 GHz Wi-Fi Switch User Guide
51
Using the Main Configuration Web Pages
Navigating the Main Web Page Configuration Screens
Using the Main Configuration Web Pages
The Quick Setup screens are used to configure the Wi-Fi Switch for basic, secured Wi-Fi operation. All
of the settings on the Quick Setup screens are also available on one of the main configuration pages.
of the settings on the Quick Setup screens are also available on one of the main configuration pages.
Navigating the Main Web Page Configuration Screens
The Home page is the default configuration screen that appears after initially configuring the Wi-Fi
Switch. Select one of the tabs (such as Security) to view and configure other settings.
Switch. Select one of the tabs (such as Security) to view and configure other settings.
Each main topic screen contains links to access associated settings (see below). For example, the Home
page has sub-menus titled Summary and Quick Setup. The sub-menu heading in bold (in this case
Summary) is the one currently being displayed.
page has sub-menus titled Summary and Quick Setup. The sub-menu heading in bold (in this case
Summary) is the one currently being displayed.
In the upper-right corner of every page is the Enable Mode link. Unless you have already entered the
enable password on the Quick Setup page during the current configuration session, you need to select
Enable Mode and enter the enable password to change configuration settings. When you have finished
configuring the Wi-Fi Switch, select Logout of Vivato Vision to end your configuration session.
enable password on the Quick Setup page during the current configuration session, you need to select
Enable Mode and enter the enable password to change configuration settings. When you have finished
configuring the Wi-Fi Switch, select Logout of Vivato Vision to end your configuration session.
Figure 28—
Accessing Sub-Menus on the Home Configuration Screen
The next time you access the
configuration web pages, you will need to
click on Enable Mode and enter the enable
password to change any settings.
configuration web pages, you will need to
click on Enable Mode and enter the enable
password to change any settings.
Click here to log out of
the current configuration
session.
the current configuration
session.