Vivato Inc. VLJ24WFSW ユーザーズマニュアル
Vivato 2.4 GHz Wi-Fi Switch User Guide
81
Monitoring Rogue APs, Clients, and System Operations
SNMP Monitoring
Create an SNMP Community
Selecting Community Options accesses the following settings to create a new SNMP community.
Settings are not configured until Create New Community is selected.
Settings are not configured until Create New Community is selected.
•
Community Name: Enter the name of an SNMP community to create.
•
Type: Specify whether to create a read only (RO) or a read/write (RW) community.
•
IP Address (Optional): Enter the IP address to use to access this community. If this option
is used, only SNMP requests from the specified IP address are honored.
is used, only SNMP requests from the specified IP address are honored.
Figure 37—
Create an SNMP Community
SNMP Version 3 Configuration Settings
The following settings are use to create an SNMPv3 trap sink and user.
Create an SNMP Version 3 Trap Sink
These settings are used to create an SNMPv3 trap sink. Settings do not take effect until Create
Trap Sink is selected.
Trap Sink is selected.
•
Hostname/IP Address: Enter the host name or the IP address for creating the trap.
•
Trap Sink Type: Specify whether to trap or to inform when a condition is detected.
•
Username: Enter the user name.
•
Authentication Type: Select the type of authentication: MD5 or SHA.
•
Password: Enter the authentication password.
•
Privacy Type: Select the encryption type to use (currently on DES is supported).
•
Password: Enter the DES encryption password.