Cytas Co. Ltd. DNB1660 ユーザーズマニュアル
User’s Manual
18
Understanding Your DocuNote
Using an AC Adapter as a Power Source
1. Plug the end of the AC adaptor into the DC-in port on the left
side panel of your DocuNote
2. Plug one end of a power cord into the AC adaptor
3. Plug the other end of the power cord into an electricity outlet
Using a Battery as a Power Source
When using a battery as a power source, make sure the battery is in
the battery compartment. If the AC Adaptor is connected to your
DocuNote, simply disconnect the AC power to DocuNote. The
DocuNote will automatically switch to battery power when the AC
power is disconnected. Please make sure the battery is fully charged
prior to using it first time to ensure that you will have full capacity of
your battery. If you need to insert or change an existing battery,
please refer to the section “Installing the Battery.”
the battery compartment. If the AC Adaptor is connected to your
DocuNote, simply disconnect the AC power to DocuNote. The
DocuNote will automatically switch to battery power when the AC
power is disconnected. Please make sure the battery is fully charged
prior to using it first time to ensure that you will have full capacity of
your battery. If you need to insert or change an existing battery,
please refer to the section “Installing the Battery.”
Starting Up Your DocuNote
Connect a power source to your DocuNote. If you want to use battery
power, check to see that the battery is securely placed in the battery
compartment.
power, check to see that the battery is securely placed in the battery
compartment.
To turn your DocuNote on:
1. Check the available power source
connected to DocuNote
2. Press and hold a power switch up until
power light is on (The Power Status
LED will light blue at this moment.)
LED will light blue at this moment.)
3. Release the switch
Power Switch