3e Technologies International Inc. 523E-900 ユーザーズマニュアル
AirGuard WiMesh 3e-
523 Series User’s Guide
Copyright
2015 Ultra Electronics, 3eTI
October 2015
80
29000169-005 Revision C1
RTS Threshold
2346
2346
Beacon Interval
1000
1000
BSSID
Add Bridge 2~n MAC
Add Bridge 1 MAC
Wireless Bridge
— Bridging Mode (Manual Bridging Mode)
Bridging Mode
Manual bridging selected
Manual bridging selected
Signal Strength LED MAC
Not Assigned (select from
drop-down list)
drop-down list)
Not Assigned (select from
drop-down list)
drop-down list)
Spanning Tree Protocol
Enable (or Disable if no
bridging loop possible)
bridging loop possible)
Enable (or Disable if no
bridging loop possible)
bridging loop possible)
Wireless Bridge
— Encryption
Bridging encryption
options
options
Select appropriate key
type/length and value.
Must be the same key as
Bridge 2~n.
type/length and value.
Must be the same key as
Bridge 2~n.
Select appropriate key
type/length and value.
Must be the same key as
Bridge 1.
type/length and value.
Must be the same key as
Bridge 1.
Table 11 - Point-to-Multipoint Bridging Setup Guide
— Auto Mode
Direction
Bridge 1
Bridge 2
Wireless Bridge
— Radio
Wirelss Mode
802.11a
802.11a
Tx Rate
AUTO
AUTO
Channel No.
Same as Bridge 2~n
Same as Bridge 1
Tx Power Mode
Auto
Auto
Propagation Distance
< 5 Miles
< 5 Miles
RTS Threshold
2346
2346
Beacon Interval
1000
1000
BSSID
Add Bridge 2~n MAC
Add Bridge 1 MAC
Wireless Bridge
— Bridging Mode (Auto Bridging Mode)
Bridging Mode
Manual bridging selected
Auto bridging selected
SSID
Must be the same as
Bridge 2~n
Bridge 2~n
Must be the same as
Bridge 2
Bridge 2
Max Auto Bridges
32 (range 1-32)
32 (range 1-32)
Bridge Priority
32768 (range 1-65535)
32768 (range 1-65535)
RSSI Window Size
5
5
Signal Strength Threshold
9%
9%
Link Sensitivity
15%
15%
Signal Strength MAC
Enter from list at the
bottom of the screen
bottom of the screen
Enter from list at the
bottom of the screen
bottom of the screen
Wireless Bridge
— Encryption
Bridging encryption
options
options
Select appropriate key
type/length and value.
Must be same as Bridge 2.
type/length and value.
Must be same as Bridge 2.
Select appropriate key
type/length and value.
Must be same as Bridge 1.
type/length and value.
Must be same as Bridge 1.
The above recommended setup requires only Bridge 1 to be set in point-to-multipoint mode. It is possible
to set all bridges in point-tomultipoint mode, in which case , each bridge would have to contain the BSSID
for each of the other bridges and Spanning Tree Protocol must be Enabled.
to set all bridges in point-tomultipoint mode, in which case , each bridge would have to contain the BSSID
for each of the other bridges and Spanning Tree Protocol must be Enabled.