3e Technologies International Inc. 527A3 ユーザーズマニュアル

The Wireless Access Point — Rogue AP Detection screen allows the 

network administrator to set up rogue AP detection. Enable rogue AP 

detection and enter the MAC Address of each AP in the network that you 

want the AP being configured to accept as a trusted AP. (You may add 

up to 128 MAC addresses.)  Enter an email address for notification of any 

rogue or non-trusted APs. (The MAC Address for the 3e–527A3 is located 

on the System Configuration — General screen. You can also select the 

following filter options.

•   SSID FIlter: Check the SSID option to only send rogue APs that 

match the AP's SSID or wireless bridge's SSID.

•  Channel Filter: Check the channel filter option to only send rogue 

APs that match the AP's channel or the wireless bridge's channel.

•  If both options are checked, only APs that match both the SSID 

and channel are sent.

The Adjacent AP list, under Monitoring/Reports on the navigation 

menu, will detail any marauding APs.