3e Technologies International Inc. 527A3 ユーザーズマニュアル

The Wireless Bridge — General screen contains wireless bridging 

information including the channel number, Tx rate, Tx power, spanning 

tree protocol (802.1d) enable/disable, and remote AP's BSSID. This page 

is important in setting up your bridge configuration. Wireless bridging 

supports two modes of operation:

•  Manual wireless bridging

•  Auto-forming wireless bridging (AWB) - with a maximum num-

ber of allowable bridges (the default is 40)

When the wireless bridge is in auto-forming mode, the wireless 

bridge sniffs for beacons from other wireless bridges and identifies APs 

that match a policy such as SSID and channel.

Instead of simply adding the APs with the same SSID/channel to the 

network, a three-way association handshake is performed in order to 

control network access. 

To make a unit the root STP node, set the bridge priority lower than 

any other node in the network.