3e Technologies International Inc. 527A3 ユーザーズマニュアル

802.11a

802.11a Turbo

Sets the wireless mode for the wireless bridge.

AUTO, 

6, 9, 12, 18, 24, 36, 48, 54 

Mbps

When set to AUTO, the card attempts to select the 

optimal rate for the channel. If a fixed rate is used, 

the card will only transmit at that rate. 

AUTO

The card attempts to select the optimal rate for the 

channel.

149 (5.745 GHz)

153 (5.765 GHz)

157 (5.785 GHz)

161 (5.805 GHz)

165 (5.825 GHz)

Sets the channel frequency for the wireless bridge.

152 (5.76 GHz) Turbo Mode

160 (5.80 GHz) Turbo Mode

Sets the channel frequency for the wireless bridge.

OFF

FIXED,

AUTO

The Tx Pwr Mode defaults to AUTO, giving the 

largest range of radio transmission available under 

ambient conditions.

The wireless bridge's broadcast range can be 

limited by setting the Tx Pwr Mode to Fixed and 

choosing from 1-5 for Fixed Pwr Level.

If you want to prevent any radio frequency trans-

mission from the wireless bridge, set the Tx Pwr 

Mode to OFF. This will not turn off RF transmis-

sions from any associated wireless devices, but 

they will not be able to communicate with the wire-

less bridge when the Tx Pwr Mode is off.

1, 2, 3, 4, 5

Select a range when Rx Pwr Mode is set to FIXED.  

Level 1 is the shortest distance (Level 1=7dBm) and 

Level 5 is the longest  (Level 5=15dBm)

< 5 Miles

5-10 Miles

11-15 Miles

16-20 Miles

21-25 Miles

26-30 Miles

> 30 Miles

Set the distance based on the distance between this 

bridge and furthest bridge that is connected to it. 

Range 1-2346

The number of bytes used for the RTS/CTS hand-

shake boundary.  When a packet size is greater 

than the RTS threshold, the RTS/CTS handshaking 

is performed.

Enter hexadecimal num-

bers

Add the MAC address of the remote bridge. The 

remote bridge's MAC address will appear at the 

bottom of the screen.

You can enter a note that defines the location of the 

remote bridge.