Parallels WorkStation 2.2, 50-99u, EDU, ESD, DE WWL2XL-A04-DE ユーザーズマニュアル
![Parallels](https://files.manualsbrain.com/attachments/6aaed39012065d8dd9e94cf4f85daf14e9840181/common/fit/150/50/cfb1f3782e28b5e1d13a3b3e2ae26295fb80db9b194bd8503f915b960591/brand_logo.png)
製品コード
WWL2XL-A04-DE
Running Virtual Machine
158
Working with a Network Adapter
When running a virtual machine with a network adapter you can:
connect/disconnect the network adapter,
switch between different adapters of your host computer and host-only networking mode.
switch between different adapters of your host computer and host-only networking mode.
Note: If the guest OS is started with the network adapter disabled, you should shut down the
guest OS first, then enable the network adapter in the Configuration Editor (select the Enabled
check box in the Network Adapter Options (on page 119) tab) and restart the guest OS.
guest OS first, then enable the network adapter in the Configuration Editor (select the Enabled
check box in the Network Adapter Options (on page 119) tab) and restart the guest OS.
How to Connect/Disconnect a Network Adapter
To connect or disconnect network adapter, do the following:
1 Select Devices->Network in Parallels Workstation menu.
2 Select the Connect/Disconnect command to connect or disconnect network adapter
respectively.
Note. You may also connect/disconnect a network adapter using context menu of the network
adapter device
adapter device
on the status bar.
How to Switch Between Adapters
To switch a network adapter of the virtual machine between bridged adapters:
1 Check to what network adapter the virtual machine is now connected.
To learn this point by mouse to the network adapter icon
on the status bar. The Mode
line shows the type of networking: bridged ethernet or host-only; the Name line shows the
name of the network adapter to which the virtual machine is connected.
name of the network adapter to which the virtual machine is connected.
2 Set a different network adapter.
For this right-click network adapter icon
on the status bar to display the context menu.
Click the name of the desired adapter in the context menu.
Note: You may also switch between adapters using commands in the Devices->Network menu.