Secure Care Products Inc INDOORNODE2 ユーザーズマニュアル
Doc. No.: A03490690 Rev.: 1 ECO: 12274 Date 11/10/2016 19
•
A hard wired LAN connection between an off-the-shelf switch and the server.
•
A Wi-Fi (802.11 a/b/g/n) network
•
Ethernet LAN and Wireless (Wi-Fi).
The SCP Wi-Fi (802.11 a/b/g/n) network may be configured to join any existing 802.11 a/b/g/n network. However,
this type of network should not be promoted. Rather a standalone secure 802.11 a/b/g/n network should be promoted
to ensure adequate security and reliability.
The Indoor Node can be used with a central power supply, POE, or wall brick.
All user programmable features of the Indoor node can be managed remotely via the ENVisionIT system.
The Indoor Node can be connected to remotely via an internet connection (GoToAssist) (Requires a connection to
an external Internet from the ENVisionIT server)
this type of network should not be promoted. Rather a standalone secure 802.11 a/b/g/n network should be promoted
to ensure adequate security and reliability.
The Indoor Node can be used with a central power supply, POE, or wall brick.
All user programmable features of the Indoor node can be managed remotely via the ENVisionIT system.
The Indoor Node can be connected to remotely via an internet connection (GoToAssist) (Requires a connection to
an external Internet from the ENVisionIT server)
Visual Indicators
Visual indicators for power and connectivity:
•
Power LED (Green/Red
•
Green = On and connected to the network
•
Red = On, but not connected to the network
The Indoor Node will relay RTLS information to the Secure Care ENVisionIT software application.
RTLS Node
The Node is a self-contained tag locator node contained in a plastic housing which mounts on the wall or suspended
ceiling.
The node is installed along with at least 3 other Nodes to locate tags within their specific area.
The Nodes are used in conjunction with a primary node in each location. The primary node then communicates tag
information back to the ENVisionIT software via wired or wireless Ethernet.
The Node is available as either UWB Channel 2 or UWB Channel 5. This is country specific.
The Node recognizes ultra-wideband signals sent from Secure Care Products ultra-wideband devices. The Node
routes received information to the appropriate locations via:
ceiling.
The node is installed along with at least 3 other Nodes to locate tags within their specific area.
The Nodes are used in conjunction with a primary node in each location. The primary node then communicates tag
information back to the ENVisionIT software via wired or wireless Ethernet.
The Node is available as either UWB Channel 2 or UWB Channel 5. This is country specific.
The Node recognizes ultra-wideband signals sent from Secure Care Products ultra-wideband devices. The Node
routes received information to the appropriate locations via:
•
Other Nodes
•
RTLS Security Tags
•
RTLS Multi-Vision Tags
•
RTLS Staff Safety Badges
•
RTLS Economy Asset Tags