Sercel Inc 0500A ユーザーズマニュアル
Rev 30-2015
Page 7
Configuring the WTU-518:
The user has to program WTU-518 parameters.
In this version of document, only the GPS, WLAN and radio configuration are described.
GPS configuration:
list of allowed GNSS constellations (QZSS,GALILEO,BEIDOU,GLONASS,GPS)
o
GPS Only is the default mode
o
GPS Only + SBAS
o
GLONASS only
o
GPS+GLONASS+SBAS
Navigation model
o Stationary (Default mode)
o Pedestrian
o Pedestrian
WLAN configuration:
Set WLAN Regulatory Domain:
Use this menu to choose the appropriate operating frequency bands for compliance with the local regulations of the
country in which the radio unit is to be used:
country in which the radio unit is to be used:
• CE for Europe: 2400-2483.5MHz band, 5.470-5.725GHz
• FCC/RSS for US/Canada: 2400-2483.5MHz band, 5.470-5.725GHz, 5.725-5.825GHz
Set WLAN Access Point Scanning Channel List:
Use this menu to set the channels to be scanned in order to find an Access Point.
In order to avoid interference with 2.4GHz proprietary radio, prefer 5GHz channels
Set WLAN SSID:
Use this menu to set the network name (SSID) which the WTU-518 has to associate to.
Radio configuration:
The radio parameters of the WTU-518 are:
Radio data rates:
The following data rates are supported:
100 kbps
The packet duration is up to 22ms. Moreover, the maximum radiated output power is limited to +13 dBm
eirp in Europe countries, +16dBm eirp in US (FCC) and Canada (RSS)
The packet duration is up to 22ms. Moreover, the maximum radiated output power is limited to +13 dBm
eirp in Europe countries, +16dBm eirp in US (FCC) and Canada (RSS)
500 kbps
The packet duration is up to 8.5 ms. Moreover, the maximum radiated output power is limited to +13 dBm in
Europe countries, +16dBm eirp in US (FCC) and Canada (RSS).
The packet duration is up to 8.5 ms. Moreover, the maximum radiated output power is limited to +13 dBm in
Europe countries, +16dBm eirp in US (FCC) and Canada (RSS).