Capital Prospect Ltd AM001 ユーザーズマニュアル

The beeping can be disable

d

 for all zones and all times by changing the buzzer mode selector 

(on the right side of the panel)

 to Alarm only.  All sensor alert beeping will be ignored, while the 

alarm siren will sound. 

 
3)  Enable Auto-Mute in Advanced Programming 
This is to terminate the beeping for the specific zone(s) after it’s been beeped for 15 seconds.  
That means beeping will be terminated automatically after 15 seconds if this feature is enabled 
for that zone.  Refer to Advanced Programming for more information on how to enable this 
feature. 

 
The control panel continuously monitors the system status as well as all the sensors status.  It 
will monitor which sensors are triggered, any low battery sensors, any mal-function sensors, or 
a phone line failure.   
 
In order to check the system status, user can press the “Status” button on the control panel, 
voice announcement will be made regarding the system and sensor status.  When the “Status” 
button is pressed, you will be notified if any of the following events is occurring: 
 

-  System armed of disarmed 
-  Any triggered sensors 
-  Any sensors with low battery warning 
-  Any sensors with failure warning 
- Phone 

line 

failure