Capital Prospect Ltd AM001 ユーザーズマニュアル

 

 can be used for programming, arming, disarming the system, and telephone 

access.  The default Master Password is [1234].   
 
Secondary Password

 can be used for arming, disarming the system, and telephone access.  

Secondary Password cannot be used for programming.  The default Secondary Password is 
[0000].   
 
Duress Password

 is used when you are forcibly compelled to disarm the control panel. You 

may enter the Duress Password.  Entering the duress password will stop the siren from 
sounding but the control panel will silently call the emergency phone numbers for help.   The 
default Duress Password is [3838].  You should definitely change this password and let all the 
users know this password.   
 
In order to change the password, follow the procedures below. 
 
1.  Press the PROG button on the side of the control panel, the [PROG] LED will be on.. 
2.  Enter the current Master Password, [1234].  Enter [2], which represents Password 

Programming. 

3.  Select the type of password you would like to change:  

• 

Enter [1] for Master Password,  

• 

Enter [2] for Secondary Password 

• 

assword 

Enter [3] for Duress P

4.  Enter new 4-digit password. 
5.  Enter new 4-digit password again, password accepted. 

 

You can program up to 5 Phone Numbers.  When the system is in panic situation, the control 

anel will call 5 phone numbers and announce its status 

p
 

ide of the control panel, the [PROG] LED will be on. 

1.  Press the PROG button on the 

right

 s

2.  Enter the current Master Password.   
3.  Enter [1], which represents Phone Number Programming. 
4.  Select the phone memory from 1 to 5.  Note: In an emergency, the control panel will call 

phone memory 1 as the first number, then phone memory 2 will be called, then memory 3, 4, 
and 5. So it is recommended to program most important phone number in phone memory 1.  
[Do not program police, 911 or fire station phone numbers into the control panel.] 

5.  Enter the phone number then press [Arm].  Note: You may enter a 3-second pause by 

pressing [Mute] if needed.  The phone number can be up to 29-digit long, including multiple 
pause periods.  

6.  After entering the phone number, enter how many times you want the phone number to be 

called, from 1 to 9 times.  

Press ARM to confirm.

 

7.  After entering the redial, enter how many times you want the emergency message to be 

played, from 1 to 9 times.  It is recommended to play the message at least 2 times. 

Press 

ARM, phone accepted.