JSW Pacific Corporation CCD-602S ユーザーズマニュアル
Observe the safety notices under all circumstances!
Error Possible
Cause
No image and
no sound
y
Camera or receiver is not supplied with electricity.
y
Is the power pack plugged in correctly?
y
The distance between the camera and receiver is too long
The
image/sound is
distorted
y
The range of the system was exceeded. Shorten the distance
y
There is a strong interference source (e.g. electric engine,
walkie-talkie…etc.) nearby.
Flickering/
running image
y
Strong spotlight in the cover range of the camera.
Normal sound,
image is too
light or dark
y
Surveillance monitor (TV) is adjusted wrongly (readjust
brightness).
y
Strong spotlight in the cover range of the camera.
White image
only on the
monitor
y
The supply voltage is too low (change batteries or power
pack operation)
Other repairs as described above may only be performed by an authorized
workshop.