Alvarion Technologies Ltd. BMAX-BA36 ユーザーズマニュアル

 

102

Operation

Chapter 4 - Operation and Administration

BreezeMAX employs an Automatic Transmit Power Control (ATPC) algorithm to 
dynamically adapt the transmit power of each SU so that it is received by the 

Services-Filtering 

Rules, Interface 

Filtering and MAC 

Addresses Deny 

List

All filtering related parameters are not applicable for IP CS Switching Mode.

RADIUS

All previous Ethernet CS Switching Mode Authentication and Accounting 

parameters are deleted from the database.

In IP CS Switching Mode,only one Authentication Server and one 

Accounting Server can be defined. The configurable Server Status and 

read-only Activity Status parameters are not applicable.

Typically, the IP Addresses of the Authentication/Accounting Server(s) 

should be set to the IP address of the Data Port Default Gateway that serves 

as a proxy for the AAA server(s). 

DRAP related 

parameters

DRAP is not used in IP CS Switching Mode. Hence, the following 

configurable and read-only parameters/options are not applicable:

In NPU menu: Voice (DRAP TTL Retries)

In AU menu: Maximum Number of Voice Calls, Active Voice Calls

In SU menu: Number of Gateways, Voice/Networking Gateways, SU IDU 

Type

Operation Mode 

(AU and SU)

Not applicable for IP CS Switching Mode (Operation Mode is always 

Advanced Si)

SU Status

Not applicable for IP CS Switching Mode (SU Status is always Temporary).

Add SU, 

Delete SU

Not applicable for IP CS Switching Mode.

Create Backup

The Profiles and Services option and the Filtering option are not applicable 

for IP CS Switching Mode.

SW Files in NPU 

(AU, SU)

Default SW File (Standard) is not applicable for IP CS Switching Mode (for 

both AU and SU).

SU MAC 

(Standard FDD) 

and Phy (Standard 

FDD) Parameters

Not applicable for IP CS Switching Mode (Operation Mode is always 

Advanced Si).