Alvarion Technologies Ltd. BMAX-BA36 ユーザーズマニュアル
120
Operation
Chapter 4 - Operation and Administration
4.5.4.3.1
Show All
Select this option to view the current status and parameters of all defined
Accounting servers. For each defined Accounting server the following details are
displayed:
Accounting servers. For each defined Accounting server the following details are
displayed:
IP Address
UDP Port
Server Status: Primary or Secondary
Operation Status: Up or Down (according to the keep alive mechanism)
Activity Status: Active or Standby (indicates whether this is the server
currently in use for accounting purposes)
currently in use for accounting purposes)
4.5.4.3.2
Add Server
Select this option to define a new Accounting server. Up to two Accounting servers
can be defined. You will be prompted to configure the following parameters:
can be defined. You will be prompted to configure the following parameters:
4.5.4.3.2.1
IP Address
The IP address of the Accounting server.
The default is null (IP address must be defined). Refer to the limitations described
in
in
4.5.4.3.2.2
UDP Port
Specifies the UDP port number used by the RADIUS server for accounting
transactions.
transactions.
Valid values: 1 to 65535.
The default value is 1813 (RFC 2866 requirement).
4.5.4.3.2.3
Server Status
Defines whether this server is Primary or Secondary. Each Accounting server can
be defined as either Primary or Secondary. Only one Accounting server can be
defined as Primary.
be defined as either Primary or Secondary. Only one Accounting server can be
defined as Primary.
4.5.4.3.3
Select Server
This option enables selecting an existing Accounting for viewing its status and
parameters, deleting it from the database or viewing its Statistics counters. The
selection is based on the server's IP address.
parameters, deleting it from the database or viewing its Statistics counters. The
selection is based on the server's IP address.
The available options are: