Alvarion Technologies Ltd. BMAX-BA36 ユーザーズマニュアル
138
Operation
Chapter 4 - Operation and Administration
4.6.3.3.1
Show All
Select this option to view the details of all currently defined authorized managers.
4.6.3.3.2
Select
This option enables selecting an existing authorized manager for viewing or
updating its properties or for deleting it from the database. The selection is based
on the authorized manager's IP address. Refer to the following Add section for
details on the configurable parameters.
updating its properties or for deleting it from the database. The selection is based
on the authorized manager's IP address. Refer to the following Add section for
details on the configurable parameters.
4.6.3.3.3
Add
Select this option to add a new authorized manager. Up to 10 Authorized Manager
can be defined. The following parameters can be configured:
can be defined. The following parameters can be configured:
4.6.3.3.3.1
IP Address
The IP address of the Authorized Manager. Refer to the limitations described in
4.6.3.3.3.2
Send Traps
The Send Traps parameters whether to enable or disable sending of traps to the
Authorized Manager.
Authorized Manager.
4.6.3.3.3.3
Read Community
The SNMP Read Community to be used by the Authorized Manager. A null Read
Community means that the read (get) operation can only be performed using the
Write Community.
Community means that the read (get) operation can only be performed using the
Write Community.
Valid Community strings: Up to 23 printable characters, case sensitive.
4.6.3.3.3.4
Write Community
The SNMP Write Community to be used by the Authorized Manager. A null Write
Community means that the Authorized Manager has Read only access rights.
Community means that the Authorized Manager has Read only access rights.
Valid Community strings: Up to 23 printable characters, case sensitive.
4.6.3.4
Bridge
The Bridge submenu enables configuring the Bridge Aging Time parameter,
setting the aging time for all addresses in the Forwarding Data Base.
setting the aging time for all addresses in the Forwarding Data Base.
The available values are from 1 to 1440 minutes, or 0 for no aging.
The default is 10 minutes.
4.6.3.5
Voice
The Voice submenu enables configuring the DRAP TTL Retries parameter. This
parameter sets the limit of TTL retries for gateways that support the DRAP
parameter sets the limit of TTL retries for gateways that support the DRAP