Alvarion Technologies Ltd. BMAX-BA36 ユーザーズマニュアル
192
Operation
Chapter 4 - Operation and Administration
4.10.7.3.10.2.1Best BST/AU Support
The Best BST/AU Support parameter allows enabling of disabling the Best
BST/AU feature in the SU .If the Best BST/AU Support feature is disabled, the SU
will start scanning in the range defined by the BST/AU ID and BST/AU ID Mask
and select the first found AU.
BST/AU feature in the SU .If the Best BST/AU Support feature is disabled, the SU
will start scanning in the range defined by the BST/AU ID and BST/AU ID Mask
and select the first found AU.
4.10.7.3.10.2.2Preferred BST/AU ID and Preferred BST/AU ID Mask
These two parameters define the initial range for scanning in order to find the best
AU. The SU will select the best AU within this range. If no AU is found within this
range, the SU will continue searching in the entire range defined by the BST/AU
ID and BST/AU ID Mask parameters.
AU. The SU will select the best AU within this range. If no AU is found within this
range, the SU will continue searching in the entire range defined by the BST/AU
ID and BST/AU ID Mask parameters.
The Preferred BST/AU ID and Preferred BST/AU ID Mask consist of 6 groups of
up to 3 digits each, where the range of each group is 0 to 255. The first 3 groups
form the base address/mask for the Operator ID. The next 2 groups form the base
address/mask for the Cell ID, and the last group forms the base address/mask
for the Sector ID. The range defined by these two parameters must be within the
range defined by the BST AU ID and BST AU ID Mask.
up to 3 digits each, where the range of each group is 0 to 255. The first 3 groups
form the base address/mask for the Operator ID. The next 2 groups form the base
address/mask for the Cell ID, and the last group forms the base address/mask
for the Sector ID. The range defined by these two parameters must be within the
range defined by the BST AU ID and BST AU ID Mask.
4.10.7.3.10.2.3 BST/AU ID and BST/AU ID Mask
These two parameters define the overall range for scanning in order to find the
best AU. The SU will initially scan the range defined by the Preferred BST/AU ID
and Preferred BST/AU ID Mask (if applicable). If no AU is found within this range,
the SU will continue searching in the entire range defined by the BST/AU ID and
BST/AU ID Mask parameters.
best AU. The SU will initially scan the range defined by the Preferred BST/AU ID
and Preferred BST/AU ID Mask (if applicable). If no AU is found within this range,
the SU will continue searching in the entire range defined by the BST/AU ID and
BST/AU ID Mask parameters.
The BST/AU ID and BST/AU ID Mask consist of 6 groups of up to 3 digits each,
where the range of each group is 0 to 255. The first 3 groups form the base
address/mask for the Operator ID. The next 2 groups form the base
address/mask for the Cell ID, and the last group forms the base address/mask
for the Sector ID.
where the range of each group is 0 to 255. The first 3 groups form the base
address/mask for the Operator ID. The next 2 groups form the base
address/mask for the Cell ID, and the last group forms the base address/mask
for the Sector ID.
4.10.7.3.10.3Clear
Select this option to clear the current Best AU Table. Typically this should be done
prior to initiating a full scanning process (otherwise the SU will try first the AUs
that are included in the current table).
prior to initiating a full scanning process (otherwise the SU will try first the AUs
that are included in the current table).
4.10.7.3.11 Radio Parameters (Advanced Si)
The Radio Parameters menu enables viewing and updated the bandwidth,
frequency scanning and antenna parameters. The Radio Parameters menu
includes the following options:
frequency scanning and antenna parameters. The Radio Parameters menu
includes the following options:
Bandwidth