Alvarion Technologies Ltd. BMAX-BA36 ユーザーズマニュアル

Services Menu

BreezeMAX Modular Base Station System Manual

235

„

Port Direction: Source

This Filtering Rule should be included in the L3/L4 Filtering Rules List of the 
From Wireless Filtering. In addition, the following configuration should be defined 
for the From Wireless Filtering Interface:

„

Active Rule Type: Layer 3/4

„

Admin Status: Enabled

„

Default Action: Deny

The MAC Addresses Deny List menu enables viewing and editing the MAC 
Addresses Deny List. This list is used to deny services to MAC Addresses behind 
SUs. Uplink frames whose source MAC address matches any of the entries in the 
list and downlink frames whose destination MAC address matches any of the 
entries in the list will be discarded.

The MAC Addresses Deny List menu also enables viewing and resetting the MAC 
Addresses Deny List Counters, which display for each of the entries in the list the 
number of frames that were discarded because they match the entry, 
accumulated since the last reset.

The MAC Addresses Deny List option is not applicable for units operating in IP CS 
Switching Mode.

4.11.5 Defining Service Profiles

The process of defining completely new Service Profiles should be done "from 
bottom up", as each entity in the process is defined using one or more "lower level" 
entities.

Define the QoS profiles that should be available for the required Priority 
Classifier (Uplink/Downlink QoS Profiles) and for the required Forwarding 
Rule (Multicast QoS Profile).

Define the Priority Classifier that should be available for the required Service 
Profile. All QoS Profiles required for the Uplink/Downlink QoS profiles list 
must be defined in advance.