Alvarion Technologies Ltd. BMAX-BA36 ユーザーズマニュアル
38
Installation
Chapter 2 - Installation Guidelines
2.1.6
Connecting the Cables
2.1.6.1
Connecting the Grounding Cable
The Grounding screw (marked
) is located on the bottom panel of the outdoor
unit.
1
Connect one end of a grounding cable to the grounding screw and tighten the
grounding screw firmly.
grounding screw firmly.
2
Connect the other end of the grounding cable to a good ground (earth)
connection.
connection.
CAUTION
Do not open the impermeability test screw - you may impair the sealing of the unit against moisture
and humidity.
and humidity.
Table 2-3: AU-ODU LEDs
Name
Description
Functionality
PWR Power
indication
Off - Power failure
Green - Power to ODU is OK, internal 3.3
VDC power supply is OK.
VDC power supply is OK.
ALARM
IDU-ODU communication and
synthesizer status indication
Off - IDU-ODU communication is OK,
synthesizer is locked.
synthesizer is locked.
Red - IDU-ODU communication failure or
synthesizer is not locked
synthesizer is not locked
ETH
Not Used
Table 2-4: AU-ODU Connectors
Name
Connector
Functionality
IF
TNC jack
Connection to the AU-IDU/ODU Power Feeder
ANT
N-Type jack, 50 Ohm
Connection to an external antenna
(GND)
Grounding screw
Connection to ground (earth)
To connect the grounding cable: