Futurecom Systems Group ULC. CMDUHF ユーザーズマニュアル

                                                                                13                                                  

 

15. Read “own” “?RSSI”.  The difference between  “Tx Pwr Pot” and “own” “?RSSI” is the

Antenna Isolation.

 

16. Unkey the Channel Module by setting “PTT” OFF.

 

17. Set “RSSI CAS Threshold” at least 6dB higher than “own” “?RSSI” level.  The “RSSI CAS

Threshold” level should be as low as possible for maximum sensitivity.

 

18. Set correct frequencies of operation in the  “Receiver Frequency” and  “Transmitter

Frequency” fields.

 

19. Exit “Block Diagram Menu” by pressing <Esc>.  With cursor keys select Yes as an answer

to Exit from CM setup?.  Press <Enter>.  With cursor keys select  Yes as an answer to
Would you like to update the E

PROM?.  Press <Enter>.

 

20. Select “File” field and then select “Exit” using cursor keys.  Press <Enter>. With cursor

keys select Yes as an answer to Exit from program.  Press <Enter>.