Z Com Inc ZAC10235 ユーザーズマニュアル

ページ / 66
 
47 
 
Open System: It allows any device to join the network without performing any security check. 
Shared  Key:  Data  encryption  and  key  are  required for  wireless  authentication  (Not  available in 
Bridge/AP Repeater mode). 
Legacy  802.1x:  Available  in  AP/Wireless  Client  mode,  it  provides  the  rights  to  access  the 
wireless network and wired Ethernet. With User and PC identity, centralized authentication as well 
as  dynamic  key management, it controls  the  security risk  of  wireless  network  to  the  lowest.  To 
serve  the  802.1x,  at  least  one  EAP  type  should  be  supported  by  the  RADIUS  Server,  AP  and 
wireless client. 
 
 
For  first  time  users,  if  EAP  type  “TLS”  is  selected,  you  need  to  import  valid  user 
certificate given by CA in prior.    To import user certificates, please refer to Chapter 5 
Management/Certificate Settings for more details. . 
 
WPA  with  RADIUS:  Available  in  AP/Wireless  Client  mode,  with  warrant  (username,  password 
and etc.) offered by user, this kind of authentication can be realized with specific RADIUS server. 
This is the common way to be adopted in large enterprise network.     
WPA2 with RADIUS: Available in AP/Wireless Client mode, as a new version of WPA, only all the 
clients support WPA2, can it be available. If it is selected, AES encryption and RADIUS server is 
required.    It is only available in AP/Wireless Client mode. 
WPA&WPA2  with  RADIUS:  Available in AP mode, it provides  options  of WPA  (TKIP)  or WPA2 
(AES)  for  the  client.  If  it  is  selected,  the  data  encryption  type  must  be  TKIP  +  AES  and  the 
RADIUS server must be set. 
WPA-PSK:  It  is  a  simplified  WPA  mode  with  no  need  for  specific  authentication  server.  In  this 
so-called WPA Pre-Shared Key, all you have to do is just pre-enter a key in each WLAN node and 
this  is  the  common  way  to  be  adopted  in  large  and  middle  enterprise  as  well  as  residential 
network. 
WPA2-PSK: As a new version of WPA, only all the clients support WPA2, can it be available. If it is 
selected, the data encryption can only be AES and the passphrase is required. 
WPA-PSK&WPA2-PSK: Available in AP mode, it provides options of WPA (TKIP) or WPA2 (AES) 
Note: