Gilbarco Inc. TCR ユーザーズマニュアル
Pr
el
imina
ry
06
/04
/08
MDE-4770 Tribrid Card Reader Installation Manual · June 2008
Page 1
Introduction
Purpose
This manual provides installation instructions for installing the M07999B001 Tribrid Card
Reader (TCR). The TCR is used in Encore
Reader (TCR). The TCR is used in Encore
®
S EMV
units only.
This equipment has been tested and found to comply with the limits pursuant to Part 15
of the Federal Communications Commission (FCC) Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy, and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate this equipment.
of the Federal Communications Commission (FCC) Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy, and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate this equipment.
The long term characteristics or the possible physiological effects of radio frequency
electromagnetic fields have not been investigated by Underwriters’ Laboratories, Inc.
(UL
electromagnetic fields have not been investigated by Underwriters’ Laboratories, Inc.
(UL
®
).
IMPORTANT INFORMATION
Table of Contents
Topic
Page
•
•
Required Reading
Before installing the Card Reader, the installer must read, understand, and follow:
• This manual
• NFPA 30A, The Automotive and Marine Service Station Code
• NFPA 70, The National Electric Code
• Applicable federal, state, and local codes and regulations
• NFPA 30A, The Automotive and Marine Service Station Code
• NFPA 70, The National Electric Code
• Applicable federal, state, and local codes and regulations
Failure to do so may adversely affect the safe use and operation of the equipment.
Note: This installation must be performed by a Gilbarco
Note: This installation must be performed by a Gilbarco
®
Authorized Service Contractor
(ASC) to ensure warranty.
MDE-4770
Tribrid Card Reader Installation Manual
June 2008