Turbocomm Tech Inc. IA300 ユーザーズマニュアル
Model : IA-300
Installation Guide
Page 16
BRIDGED ETHERNET FOR WINDOWS NT 4.0
NOTE: To perform the installation logon as Administrator. TCP/IP protocol must be
installed prior to the driver installation. At the Network window select the Protocols
tab and verify that the TCP/IP is present.
installed prior to the driver installation. At the Network window select the Protocols
tab and verify that the TCP/IP is present.
1.
At the desktop, double click My Computer, double click Control Panel, double click
Network and then select the Adapters tab of the Network window.
Network and then select the Adapters tab of the Network window.
2.
Click Add (to add new adapters).
3.
In the Select Network Adapter window click Have Disk.
4.
Insert the IA-300 Driver CD into the drive, enter the < CD drive letter>:\Drivers\NT40\
BEoA (e.g.D:\Drivers\NT40\BEoA) and click OK.
BEoA (e.g.D:\Drivers\NT40\BEoA) and click OK.
5.
The Select OEM Option window will find the ITeX ADSL PCI NIC. Click OK. The
system will copy the drivers to the hard drive.
system will copy the drivers to the hard drive.
6.
When the Service Option window appears, click Next for the default installation
(VPI=8, VCI=35, Framing=LLC). For Advanced settings, please consult your ADSL
service provider for detailed information.
(VPI=8, VCI=35, Framing=LLC). For Advanced settings, please consult your ADSL
service provider for detailed information.
NOTE: If you click Advanced, the Service Options window appears. Enter the
service Connection Address, click OK. The previous Service Option window will then
appear, click Next. Then the Network window will appear, click Close .
service Connection Address, click OK. The previous Service Option window will then
appear, click Next. Then the Network window will appear, click Close .
7.
The TCP/IP Properties window will appear and prompt the user for information. When
not connecting to a DHCP server, enter the IP address (e.g. 192.168.4.39).
not connecting to a DHCP server, enter the IP address (e.g. 192.168.4.39).
8.
Enter the Subnet Mask (e.g. 255.255.255.0).
9.
Enter the Default Gateway address.
NOTE: Consult your ISP for the TCP/IP Properties.
10. Select the DNS Configuration tab and enter the Host Name (e.g. speed_touch)
11. Then enter the Domain Name (e.g. pacbell.net)
NOTE: Use the DNS Service Search and Do main Sufix Search to locate the Host
Name and Domain. Click Add to save the address. Repeat the process for additional
DNS entries.
Name and Domain. Click Add to save the address. Repeat the process for additional
DNS entries.
12. Click OK to update the changes.
NOTE: Consult your ISP for the TCP/IP Properties.
13. The system must be restarted for the changes to take effect. Click Yes to restart.
NOTE: The default installation ADSL mode is ANSI T1.413 Issue 2 or ANSI. If your ISP
is providing a different mode then you need to change the setting
is providing a different mode then you need to change the setting
14. On the right-hand side of the task bar, right click on the Diagnostic Tools icon. Then
select Configuration.