CyberTAN Technology Inc. RV130W ユーザーズマニュアル

 

The Setup Wizard and Device Manager are supported on Microsoft 
Internet Explorer 7.0 or later, Mozilla Firefox 3.5 or later, Apple Safari 3.0 or 
later, and Google Chrome 5.0 or later. 

To configure the device by using the Setup Wizard:

Power on the PC that you connected to the LAN1 port in 

 section. Your PC becomes a DHCP 

client of the device and receives an IP address in the 192.168.1.xxx 
range. 

Launch a web browser window on your PC. 

In the address bar, enter the default IP address of the device 
192.168.1.1. A site security certificate message appears. Cisco 
RV130/RV130W  uses a self-signed security certificate. This 
message appears because the device is not known to your PC. 

Click Continue to this website (or the option shown on your 
particular web browser) to continue. The login page appears.

Enter the username and password. The default username is cisco. 
The default password is cisco. Passwords are case sensitive. 

Click Log In. The Router Setup Wizard is luanched.

Follow the on-screen instructions to set up your device. The Router 
Setup Wizard tries to automatically detect and configure your 
connection. If it is unable to do so, it might ask you for  information 
about your Internet connection. Contact your ISP for this 
information.

Change the password as instructed by the Router Setup Wizard or 
follow the instructions in the 

 section. Log into the device with the 

new username and password. 

The Device Manager Getting Started page appears. It displays the 
most common configuration tasks. 

Click one of the listed tasks or a task listed in the navigation bar to  
complete the configuration. 

Save any additional configuration changes and log out of Device 
Manager.