Fujifilm Neopan 100 Acros 5-Pack 16010291 ユーザーズマニュアル

NEOPAN 100 ACROS (120) • FUJIFILM DATA SHEET

3

(4) Washing

Wash the film in running water for 20 to 30 minutes.  The

use of Fuji QW (quick washing agent) is recommended

when a shorter washing time is desired or when the pro-

cessed film shows a slight reddish purple cast.  When

using Fuji QW, pre-wash the film for about 30 seconds,

immerse it in Fuji QW solution for 1 minute, and wash it

in running water for 5 minutes. The required wash water

temperature is 15 to 25°C (59 to 77°F).

(5) Drying

After washing, wipe both sides of the film very carefully

with a soft sponge, then immerse it in a 1-to-200 solution

of Fuji Driwel for 30 seconds and hang it up for uniform

drying. For natural drying, hang the film in a well-venti-

lated dust free location.  To protect important negatives

from oxidizing gases that cause color fading, it is recom-

mended that the film be treated with Fuji Ag Guard.  In

this case, use Fuji Ag Guard instead of Fuji Driwel in the

procedure.

11.

RESOLVING POWER

Processing: Microfine, 20°C (68°F), Small tank development

Chart Contrast

1.6 : 1 ....................... 60 lines/mm

Chart Contrast

1000 : 1 ..................... 200 lines/mm

10.  DIFFUSE RMS GRANULARITY VALUE

............... 7

Processing: Microfine

Micro-densitometer Measurement Aperture:  48 µm in diameter.

Magnification: 12X

Sample Density:  1.0 above minimum density

12.

SPECTRAL SENSITIVITY CURVE

8.

   RETOUCHING

Both sides of the film are amenable to retouching by

pencil.

9.

PROCESSED FILM STORAGE

Exposure to light, high temperature and humid condi-

tions can cause color changes in processed films.

Therefore, place such films in sleeves and store them in

dark, dry, cool and well ventilated locations under the

following conditions.

O

Medium-term storage:

Below 25°C (77°F) at 30% to 60% RH

O

Long-term storage :

Below 10°C (50°F) at 30% to 50% RH









