Cameo Communications Inc WTA268 ユーザーズマニュアル

If any of the above items are missing, please contact your reseller.

Setup Button (Recessed)

S/PDIF Digital Audio Port

On/Off Button

HDMI Port

Composite Audio/Video Ports

Power Connector

Power Adapter

Outlet

HDMI Cable

Laptop

HDMI Input

TV

Connect the supplied power adapter to the back of the WiDi TV adapter and the other end to a power outlet 
or surge protector. The WiDi  TV adapter LED is red when it powers up. Then the LED turns yellow to indicate 
it is ready, but is not yet connected to your computer.

Power on your TV and select the correct TV input source. Please refer to your TV documentation for 
instructions on how to change your input source. 

The Startup screen displays on your TV within 30 seconds. If this screen does not appear, make sure your TV 
is set to the correct video input and all the cables are firmly secured.

Launch the Intel® Wireless Display software on your laptop. Some laptops may have a button or key, or 
launch from Windows. Click Start, type Intel® Wireless Display in the search field and then run the Intel® 
Wireless Display software.

Use the Intel® Wireless Display software to scan and find the TV adapter for Intel® WiDi . The screen below 
shows that the Intel® Wireless Display software has found the wireless adapter.

Doub

le-click the 

 TV adapter listed under Detected Adapters to connect to it. The LED on the 

TV adapter will start flashing green.

If you are connecting the laptop to the WiDi TV adapter for the first time, it will display a 4-digit security code on the TV. Enter 
this 4-digit security code into the Intel® Wireless Display software.

The TV screen will display your laptop screen and the LED on the WiDi TV adapter will turn solid green. Your device is now 
ready to use.

Thank you for purchasing the WiDi TV Adapter.  Follow the easy steps in this guide to properly set up your
 device. Please verify that all the package contents listed below are available.  

•  Requires a laptop with Intel® Wireless Display powered by select Intel® Core™ processors
•  TV with a HDMI or AV Composite input

Connect the WiDi  TV adapter to your TV. Use the HDMI connection for the best quality video.

  

This device may not be used for setting up outdoor radio links in France and in some areas the RF output power 
may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the 
end-user should contact the national spectrum authority in France.

Česky [Czech] 

[Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a 

dalšími příslušnými ustanoveními směrnice 1999/5/ES. 

 

Dansk [Danish] 

Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse]

overholder de væsentlige krav og øvrige rel evante krav i direktiv 1999/5/EF. 

Deutsch 

[German] 

Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit 

den grundlegenden A nforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 

1999/5/EG befindet.

 

Eesti [Estonian] 

Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of 

equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele 

teistele asjakohastele sätetele.

English 

Hereby, 

essential requirements and other relevant provisions of Directive 1999/5/EC.

[name of manufacturer], declares that this [type of equipment] is in compliance with the  

 

Español 

[Spanish] 

Por medio de la presente [nombre del fabricante]  declara que el [clase de equipo]  cumple con los

requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 

1999/5/CE.  

Ελληνική [Greek] 

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ  [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ  [type of equipment]

ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ 

ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.   

 

Français [French] 

Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux

exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.

 

Italiano [Italian] 

Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai 

requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

 

Latviski 

[Latvian] 

Ar šo [name of manufacturer / izgatavotāja nosaukums]  deklarē, ka [type of equipment / iekārtas tips]

 atbilst Direktīvas 1999/5/EK bū tiskajām prasībām un citiem ar to saistītajiem noteikumiem.

 

Lietuvių 

[Lithuanian]  

Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 

1999/5/EB Direktyvos nuostatas. 

Nederlands 

[Dutch] 

Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met  

de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

 

Malti [Maltese]

Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet 

essenzjali u ma provvedimenti oħrajn relevanti li hemm fid Dirrettiva 1999/5/EC.

-

 

Magyar 

[Hungarian] 

Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ  

követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak

. 

Polski [Polish] 

Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi 

wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

 

Português 

[Portuguese] 

[Nome do fabricante] declara que este [tipo de equipamento]  está conforme com os requisitos 

essenciais e outras disposições da Directiva 1999/5/CE.

 

Slovensko 

[Slovenian] 

[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi 

relevantnimi določili direktive 1999/5/ES.

 

Slovensky 

[Slovak] 

[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] 

ustanovenia Smernice 1999/5/ES.

 

Suomi [Finnish]

[Valmistaja = manufacturer]  vakuut taa täten että [type of equipment = laitteen tyyppimerkintä]

tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden 

ehtojen mukainen. 

Svenska 

[Swedish] 

Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga 

egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

 

Look through the FAQ contents for a topic that comes closest to describing your problem. 

Resetting reverts the application back to its out-of-the-box state. To reset, click Help and select About. Click Reset 
Settings. To proceed with the reset, click the Yes button on the Reset Intel Wireless Display settings page.

After starting Intel Wireless Display, all detected adapters will be displayed as not previously connected. However, it 
will not be necessary to enter a security code since the security settings are stored in the adapter.

If the adapter is not responding correctly, and resetting the application has not helped, try restarting the adapter. Push 
the power button once to turn the adapter off, and push it again to turn it on. After the To get started screen appears 
on the TV, rescan before trying to connect.

Clearing the adapter’s memory erases security settings and the user modified adapter name. This is helpful if you 
choose to sell your adapter, or if a neighbor came to your house and connected to your adapter, but now you do not 
want them to accidentally connect from their house.
To clear the adapter’s memory, press and hold the setup button on the back of the adapter for more than 5 seconds or 
until the LED starts blinking. Clearing the adapter memory requires you to enter the security code displayed on the 
TV in order to connect again.

Closing the lid of the laptop may put the system to sleep or turn it off, and as a result, end the Intel Wireless Display 
session. To close the lid and continue using the application:

1. Click the Windows Start icon and type Closing the lid in the search field.
2. Click the Change what closing the lid does link.
3. Next to the When I close the lid heading and under both the On battery and Plugged in headings, select Do 
    nothing.
4. Click the Save changes button.

• Adapter Name. This is either the default factory name or the name you choose in the initial set up process. It is 
   okay to change the name at anytime. Just type a new name. If the default “Name” is deleted and the field is left 
   empty, the application will restore the name to the previous value. NOTE: The valid character set for adapter names     
   are upper and lower case letters A through Z, numbers and punctuation marks, also defined as ASCII characters 32 
   through 126.

• Network address. This is the IP (Internet Protocol) address.
• Adapter ID. A preset and unchangeable number set by the adapter.
• Adapter Model. This is the model name of the adapter currently connected.
• Adapter firmware version. The version of the application. If a Web update is required, click the Update 
  Available button.
• Register. Register your adapter to obtain support and get the latest software updates.

To change the adapter display language, use the recessed button while the adapter is on the ready screen shown.
• A short press (less than half a second) will step forward through the languages.
• A long press (more than half but less than one and a half seconds) will step backward through the languages.

The language change will immediately be reflected on your TV screen.

If the firmware needs updating, there will be an Update available button on the Adapter Properties page. (The 
Properties button is only available if you are currently connected to an adapter.) Click the Update available button 
to begin the update process. Once the update begins the TV screen will read Updating adapter. Please wait. After 
the procedure is complete, the adapter automatically disconnects from the laptop. Scan again to connect to the 
adapter.

Warning: Pressing the button for more than 5 seconds will clear the security profiles saved 
in the adapter, which will require you to repeat the first-time connection procedure.

• Adjust the TV Display Image. If the laptop display is cropped or not filling the entire TV screen check here.
• Audio test. To troubleshoot audio problems check here.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 
communications.  However, there is no guarantee that interference will not occur in a particular installation.  If 
this equipment does cause harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the interference by one of the 
following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance 
could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 
This device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.

For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test 
methods have been applied in order to prove presumption of conformity with the essential requirements of the 
R&TTE Directive 1999/5/EC:

EN60950-1: 2009
Safety of Information Technology Equipment

EN 50385: 2008
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic 
fields (0 Hz – 300GHz)

EN 300 328 V1.7.1 (2006-10)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data 
transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; 
Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

EN 301 489-1 V1.8.1 (2008-04)
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) 
standard for radio equipment and services; Part 1: Common technical requirements

EN 301 489-17 V2.1.1 (2009-05) 
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) 
standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission 
systems and 5 GHz high performance RLAN equipment

This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states 
and EFTA countries, except in France and Italy where restrictive use applies.

In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authoriza-
tion to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications 
and/or network services.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This 
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The availability of some specific channels and/or operational frequency bands are country dependent and are 
firmware programmed at the factory to match the intended destination.

The firmware setting is not accessible by the end user.

WTA-268 TV Adaptor 
for Intel WiDi

Power Adapter

HDMI Cable