HBC-radiomatic GmbH TF011 ユーザーズマニュアル
TF0110__ integration manual
HBC
Author: Florian Abelein
Date: 08.06.2018
Seite 1 von 4
Revision: 0
1
Introduction
This document describes the installation of TF0110__ into the HBC-transmitter.
2
Installation
2.1
Possible Hosts
The module TF011010 may be installed in every HBC-transmitter. It has to be supplied with a DC voltage of 3.0 V
up to 5V. The module TF011010 has an integrated RFID-antenna. So there is no need for an antenna installation.
up to 5V. The module TF011010 has an integrated RFID-antenna. So there is no need for an antenna installation.
2.2
Installation process
First of all the TF011010 module has to be put into the groove of the transmitter housing as the next picture shows.