OKI ML3390 01091308*01256402 ユーザーズマニュアル

Chapter 3: Paper handling

3-11

Feeding continuous
paper from the
bottom (tractor feed,
accessory)

Set the top of form if necessary with the »Top Of Form« function.
This is described later in the manual.

If the tractor feed is installed, you can also feed continuous paper
from the bottom. This option is available if you have a printer stand
or table with a slot which allows continuous paper to be fed in from
below.

Installation of the tractor feed and paper handling is described in
the chapter »Accessories«.

An additional bottom tractor feed gives you the means of feeding
continuous paper from the bottom. In order to be able to use this
function, you first have to fit the bottom tractor feed to allow the
printer to be placed on the built-in supports.

Installation of the bottom tractor feed and paper handling is de-
scribed in the chapter »Accessories«.

Your printer will allow you to switch without difficulty between
printing on continuous paper and cut sheets. The continuous paper
is removed from the paper path at the press of a button. You can
then insert a cut sheet of paper which the printer will then draw in
automatically.

☞

Do not use the PARK function in conjunction with the pull
tractor feed otherwise the continuous paper will run completely
out of the tractor guide.

Feeding continuous
paper from the
bottom (tractor feed,
accessory)