Elpas Solutions Ltd. 5-LW2430371 ユーザーズマニュアル

P/Ns: 5-LW200037-1 (BLE, LF, No Button), 5-LW240057-1 (Fall detect, RF/LF, BLE), 5-

LW243037-0 (Fall Detect, RF/LF/IR), 5-LW242057-0 (Fall Detect, RF/LF), 5-LW243037-1 
(Fall Detect, IR/RF/LF, BLE), 5-LW242057-1 (Fall Detect, RF/LF, BLE) 

 

 

 

 

 

This User Guide provides basic instructions for the successful usage of the Lone Worker Transmitter. 

 CAUTION! Reasonable effort was made to ensure that the specifications and other information in this guide are accurate and complete at the time of its 

publication. Nonetheless, all information contained in this document is subject to change at any time without prior notice. Any modifications to this equipment 

without prior written consent of Elpas Solutions Ltd. will void all warranties including the pertinent regulatory certifications and as such revoke your authority 

to operate this product. Furthermore, unauthorized modifications may also result in damage to this device and may cause a safety hazard to the users. 

The Elpas Shield is a personal duress button device with optional pull cord and fall 

detection capabilities. Elpas Shield is designed for real-time monitoring and tracking of 

staff members and visitors, both indoors and outdoors. The LoneWorker Fall Detect 

Transmitter is designed both for seniors in assisted living facilities or work place staff 

members that may be subject to attack or injury in high-risk environments. 

Alarms can be triggered either by squeezing the two side buttons. In the Fall Detect 

version, when worn on a belt, a short rip cord may be attached to a belt loop so that 

an alarm is transmitted when the device is pulled off the belt. 

 Users can also wear the Shield as a pendant using a lanyard. If you choose to do so, make 

sure you use a lanyard for which, the force required to unlatch the tether switch is less than the 

force required to open the clasp. 

The pull mechanism is particularly useful for seniors with arthritis who have difficulties 

pressing buttons. 

The LoneWorker Fall Detect Transmitter also detects falls and alarms when tilted 

horizontally. To prevent false alarms, the device indicates a pre-alarm by giving the 

wearer a chance to cancel the alarm before it is transmitted by pressing on the front 

cancel button. 

 

Elpas Shield based help call systems may be monitored by Elpas ELC controllers 

and/or by Eiris Software which also receives alerts, through Eiris Cloud, from the 

LoneWorker application that connects to Elpas Shield through Bluetooth, outdoors. 

Elpas Low Frequency Beacons may be used to provide room level indoor location. 

Outputs on all Elpas network devices may be used to drive sirens, strobe lights or PA 

systems. Alerts may be sent to various handheld devices such as DECT handsets 

using Eiris DECT interfaces or to IOS or Android smartphones using EirisGo apps. 

Calls may be cleared by exposing Elpas Shield to a responder’s handheld LF beacon 

requiring that staff arrive at the location of the caller. 

The same Elpas infrastructure used for the duress solution may also be leveraged for 

Access control, Asset tracking, Attendance and intrusion alarming making Elpas one 

of the most competitive comprehensive solutions available today.