Elpas Solutions Ltd. 5-LWA00433 ユーザーズマニュアル
Elpas Lone Worker Transmitter
P/N: Honeywell Version
User Guide
www.elpas.com
Page 1 of 4
V5/June 2013
Introduction
The Elpas Lone Worker Transmitter is a commercial-grade
Active RFID Tag that provides discreet around-the-clock
wireless location based tracking of staff members.
The Elpas Lone Worker Transmitter is a commercial-grade
Active RFID Tag that provides discreet around-the-clock
wireless location based tracking of staff members.
The Transmitter delivers precise real-time location data that
identifies the individual in trouble and the location of the
evolving security incident. This data is used by RTLS
applications and security platforms for dispatching emergency
response teams.
identifies the individual in trouble and the location of the
evolving security incident. This data is used by RTLS
applications and security platforms for dispatching emergency
response teams.
The Transmitter includes two user programmable wireless
emergency call buttons on either side of the unit for manual
duress alerting. Pressing the both push buttons simultaneously
will trigger the transmitter to emit a duress alert.
emergency call buttons on either side of the unit for manual
duress alerting. Pressing the both push buttons simultaneously
will trigger the transmitter to emit a duress alert.
(Actual product may vary from photo)
Product Specifications
RTLS Technologies
RF (433MHz) LF (125KHz)
RF (M otion/Stationar y)
Supervision messages every 10secs /60secs
RF Under LF
6 RF transmissions (each transmission
@ 4ms in duration), 312.5ms apart
Event Messages
Button Press/Release
Low Battery
3 RF transmissions (each transmission
@4ms in duration), 312.5ms apart
Power Source
CR2450 Lithium Battery
Batter y Life
18 to 36 months, depending on usage
LED Status Indicator
Button Press/Release, Motion/Stationary
Entering/Exiting LF Field, Low Battery
Badge ID
Unique, factory-programmed ID
Constr uction
Nylon Plastic (IP67)
Dimensions
(H x W x D)
8.3 x 4.4 x 1.7 cm (3.3 x 1.7 x 0.7 inches)
Weight
40 grams (1.4 ounces)
Mounting
Lanyard worn
Operating
Envir onm ent
Envir onm ent
Temp: -30°C to 70°C (25°F to 159°F)
Humidity: 95% non-condensing
Managem ent
Softwar e
Softwar e
Eiris V4.8 or higher
Elpas Configurator V4.8 or higher
Regulator y
IC, FCC & CE compliant
Warranty
1 year limited (excluding battery)
Product offerings and specifications are subject to change without notice..
Accessories
5-PBA90003
CR2450 Lithium Battery (tray of 25pcs)
5-WTA90002
Pendant Lanyard (set of 5)
Usage Considerations
It is important that you read, understand, and
follow the instructions in this user guide.
follow the instructions in this user guide.
Should you have any questions, please contact
your local Elpas support representative before
proceeding.
your local Elpas support representative before
proceeding.
Package Contents
The Lone Worker Tag is shipped with the
following items:
following items:
One Lone Worker Tag
One Pendant Lanyard
One CR2450 Lithium Battery
Preliminary_V5