Wavetrend Technologies Limited L-TG800 ユーザーズマニュアル
DOCUMENT NO
PRODUCT NO
WAVETREND
DATE
PAGE
EAB-00400-00-PI L-TG800
WAVETREND
ASSET
TAG 2002/10/09
1
OF
2
Link-it™
Product Information Sheet
Active Tags
L-TG800 (Wavetrend Asset Tag)
Description:
The Link-it™ series of Active Asset Tags
are powered by an internal battery. The
Tag will, for the duration of its life, transmit
a Radio Frequency (RF) signal at a pre-set
time-interval. The Tag life is estimated at 5
years at a transmission time interval of
approximately 15 seconds. The life-span of
the Tag ends when the battery life is
exhausted. Battery status can be inferred
by interrogating the internal Tag Age
Counter Value.
The transmitted Tag data includes Customer Site Code (CSC), Tag ID, Tag
Age Counter Value, Movement Alarm and Tamper Alarm status.
For protection against adverse environmental conditions, Link-it™ Asset Tags
are encapsulated in a moulded plastic case, which is ultrasonically sealed
during the manufacturing process.
are powered by an internal battery. The
Tag will, for the duration of its life, transmit
a Radio Frequency (RF) signal at a pre-set
time-interval. The Tag life is estimated at 5
years at a transmission time interval of
approximately 15 seconds. The life-span of
the Tag ends when the battery life is
exhausted. Battery status can be inferred
by interrogating the internal Tag Age
Counter Value.
The transmitted Tag data includes Customer Site Code (CSC), Tag ID, Tag
Age Counter Value, Movement Alarm and Tamper Alarm status.
For protection against adverse environmental conditions, Link-it™ Asset Tags
are encapsulated in a moulded plastic case, which is ultrasonically sealed
during the manufacturing process.
The L-TG800 Tag generally used for Asset tagging applications. The L-TG800
is ideally suited for operating on metallic surfaces (or plastics containing a
high metal content). The mounting and affixing of a Tag depends on the type
of application. The standard method is by VHB type double-sided adhesive
tape (Product Code L-TA600).
The Tag can be configured to accommodate Wiegand interfacing.
is ideally suited for operating on metallic surfaces (or plastics containing a
high metal content). The mounting and affixing of a Tag depends on the type
of application. The standard method is by VHB type double-sided adhesive
tape (Product Code L-TA600).
The Tag can be configured to accommodate Wiegand interfacing.
Features:
•
Configurable settings, including Site / Vendor ID, Tag ID, Transmission
Repetition Interval and Alarm functions (these are programmed at order
placement stage)
Repetition Interval and Alarm functions (these are programmed at order
placement stage)
•
Low power consumption. Tag life is estimated at 5 years when transmitting
at a 15-second interval.
at a 15-second interval.
•
Randomised time-slots (Standard percentage deviation) minimise
continuos collisions
continuos collisions