Given Imaging Limited PATENCYSCANNER ユーザーズマニュアル
Given Imaging Ltd.
8
DOC-0062-02
TesTag
The TesTag is a plastic rod of 20 cm length. At one end it is equipped with an RFID
tag similar to the one in the M2A Patency Capsules, at the other end a suction cap is
attached.
tag similar to the one in the M2A Patency Capsules, at the other end a suction cap is
attached.
The TesTag is used to verify the detection range of the Patency Scanner in a given
environment.
environment.
Caution
!
Operating the Patency Scanner in the proximity of the following items might
reduce the Scanner’s range:
reduce the Scanner’s range:
• Operating monitors—Use the Scanner at least 5 meters away
from any operating monitors (Monitors in adjacent rooms should be
turned off.).
turned off.).
• Large metallic objects—Use the Scanner at least 30 cm away
from large metallic objects.
• Electronic or magnetic cards/badges and remote controls—
Remove and put aside, at least 1 meter away, any electronic or
magnetic cards/badges and remote controls which may contain
RFID tags.
magnetic cards/badges and remote controls which may contain
RFID tags.
The TesTag tests the interference of the above within a given environmment, and
thus enables to select and validate the proper working environment for the M2A
Patency Scanner.
thus enables to select and validate the proper working environment for the M2A
Patency Scanner.
A TesTag is supplied with each 10-Pak of M2A Patency Capsules.