Advance Security Inc TR61 ユーザーズマニュアル
REMOTE CONTROL TRANSMITTER:
TRANSMITTER OPERATION
Transmitter
Button
System Function
Remark
Lock Doors & Arm System
Panic function
Press and Hold for 3 seconds.
Press Trunk
button to stop
panic function
Car Locator
Press when in armed mode
-
Arm and Delete The 2 Stage
Shock Sensor
Press twice within 3 seconds.
Pass will appear on the remote
-
Arm System and Hidden
Alarm Function
Press within 3 seconds and Hold
button for 2 seconds
+
Silent Arming / Disarming
Ignition in "off" position.
+
Active Anti Car-Jacking Mode
Ignition in "on" position press
and hold for 2 seconds
Unlock Doors & Disarm
System
-
Two Steps Door Unlock &
Disarm System(optional)
Press twice within 3 seconds.
Trunk Release (Channel 3)
Press and Hold for 2 seconds
-
Passive Arming By-pass
While the system Disarmed.
Activate or Turn Off The
Remote Start
Press button once.
Press
Twice if set to start safety mode
+
Channel # 4 Timer Output (4)
Channel 4
II
Switch to 2nd car operation
For 1-way TX only, Press & hold
until TX LED on
ACTIVE LOCKING – LOCK & ARMING:
1. Press
button on transmitter.
2. The siren or horn will chirp once and the parking lights will flash once indicating that the system is now
armed. The vehicle doors will lock upon arming when interfaced with the security system.
Note: Defective sensor reminder: If the siren or horn sounds 3 chirps, then you have left a door, trunk, or
hood lid ajar. (OPTIONAL)
hood lid ajar. (OPTIONAL)
SILENT LOCKING AND UNLOCKING: ARMING / DISARMING: Press the
+
button together on the
transmitter to LOCK or UNLOCK your security system, No chirp sound will be heard; arm / disarm confirmation
will be through the vehicles parking lights only.
will be through the vehicles parking lights only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Pressing the
button on the transmitter twice within 3
seconds will arm the security system and by-pass the shock sensor. The system will chirp one additional time to
confirm the sensor bypass mode was activated. The sensor bypass feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during the next arming cycle
confirm the sensor bypass mode was activated. The sensor bypass feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during the next arming cycle
PASSIVE LOCKING OR ARMING: Programmable
Active arming / disarming is controlling your security system via the remote transmitter. This security system is
equipped with an optional Passive Arming feature, which allows the security system to arm 30 seconds after the
last door is closed. Operation is as follows.
Active arming / disarming is controlling your security system via the remote transmitter. This security system is
equipped with an optional Passive Arming feature, which allows the security system to arm 30 seconds after the
last door is closed. Operation is as follows.
1.
Turn the ignition to the “OFF” position and exit the vehicle.
2.
After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any
door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once all vehicle
entrances are closed.
door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once all vehicle
entrances are closed.
3.
After 30-second timer has elapsed, the security system will automatically “ARM”. The siren or horn will
chirp [1] time and the parking lights will flash [1] time.
chirp [1] time and the parking lights will flash [1] time.
PASSIVE DOOR LOCKING: Programmable
The vehicle doors will automatically lock after passive arming cycle has been completed.
PASSIVE ARMING BY-PASS: While the system is disarmed, Press the
button twice, the system will
respond with [1] chirp and LED will turn “ON”. The security system will remain in this temporary state for as
long as you wish. To exit passive by-pass, press the transmitter
or
buttons and the system will return to
normal status.
ACTIVE UN-LOCKING – UNLOCK & DISARM:
ACTIVE UN-LOCKING – UNLOCK & DISARM:
1. Press the
button on the transmitter.
2. The siren or horn will chirp twice and parking lights will flash twice to indicate that the security system is now
disarmed. The vehicle doors will unlock when interfaced with the security system.
IGNITION CONTROL DOOR LOCKS.
If the vehicle’s door locks have been interfaced to the security system, the system will automatically lock the
vehicle's doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is turned
“OFF”.
TRUNK RELEASE: Press and hold
button on transmitter for three seconds to remote control the trunk
release or other electric devices.
CAR LOCATOR: Press the
button on the transmitter when the vehicle is in the armed / locked mode to active
car locator function. The siren or horn will chirp 6 times. The parking light will flash 12 times, allowing you to
easily locate your car.
easily locate your car.
VALET MODE: (System is in Disarm Mode)
The valet switch allows you to temporarily bypass all alarm function, eliminating the need to hand your
transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions
and remote start functions are bypassed, however, the remote panic feature and remote door locks will remain
operational. To use the valet mode, the system must first be disarmed either by using your remote transmitter,
or by operating the Manual Override sequence.
The valet switch allows you to temporarily bypass all alarm function, eliminating the need to hand your
transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions
and remote start functions are bypassed, however, the remote panic feature and remote door locks will remain
operational. To use the valet mode, the system must first be disarmed either by using your remote transmitter,
or by operating the Manual Override sequence.
Get into/out valet mode using the ignition key.
Enter Valet Mode:
a). Under disarm mode, turn the ignition to “ON\OFF\ON” position.
a). Under disarm mode, turn the ignition to “ON\OFF\ON” position.
b). Press and hold valet switch for 3 seconds until the LED turns ON solid. The LED will remain on as long
as the system is in 'valet mode'.
Exit Valet Mode:
a). Turn ignition 'ON\OFF\ON'.
a). Turn ignition 'ON\OFF\ON'.
b). Push and hold valet switch for 3 seconds, The LED will turn off indicate the system are exiting the
valet mode.
Model IUV711A
The lock icon will be displayed
when the door are locked.
when the door are locked.
The unlock icon will
be displayed when the
door are unlocked
be displayed when the
door are unlocked
Valet Mode
All the function shall be
temporarily on hold.
All the function shall be
temporarily on hold.
Driver paging
Someone is paging
you from of your
vehicle
you from of your
vehicle
Warn Away trigger
Trigger on Shock Sensor
Trigger on Shock Sensor
Shock Sensor Trigger
Trigger on Shock Sensor
Trigger on Shock Sensor
Hood Trigger
Hood is illegally opened
Hood is illegally opened
Trunk Trigger
Trunk is illegally opened
Trunk is illegally opened
Door Trigger
Doors are illegally opened
Doors are illegally opened
Sensor Bypass
Sensor bypass under Arm
mode
Sensor bypass under Arm
mode
Ignition Trigger (icon flash)
Ignition switch is illegally
turned on
Ignition switch is illegally
turned on
Button Lock (icon on)
Remote Transmission
You are transmitting the
signal to control unit
You are transmitting the
signal to control unit
In – Range Indicator
You are within the range
of the remote control.
You are within the range
of the remote control.
2nd Car Operation
System trigger
Activate Channel 3 (Trunk
Release).
0 :00
Parking Meter
Reminder when time is up
for parking
CH 4
Activate Channel 4
CH 5
Activate Channel 5
12:00
Time Monitor
Low Battery
You have to replace
battery of remote control.
You have to replace
battery of remote control.
Alarm Clock
Power Save (battery icon
full bar flash)
full bar flash)
Melody Mode
Remote Control alert
user through melody sound
Remote Control alert
user through melody sound
Vibration Mode
Remote Control vibrates
when the system is
triggered
Remote Control vibrates
when the system is
triggered
Engine Cranking
Your vehicle engine
Cranking by remote
control
Your vehicle engine
Cranking by remote
control
Engine Running
Your vehicle's engine
is running
is running
Timer Control Start
Engine start automatically
every 2 or 3 hours.
Engine start automatically
every 2 or 3 hours.
Manual Gear Mode
programmed
programmed
STANDARD LCD ICON CONFIGURATIONS:
BATTERY REPLACEMENT:
CR2032 x 2 PCS battery powers the Remote Transmitter. When the power of the
battery weakens a
battery weakens a
icon shall be displayed on the LCD screen. When the old
batteries are replaced, there will be beep sounds indicate the power is up of the
transmitter.
The One-way remote is powered by two CR2016 Batteries.
transmitter.
The One-way remote is powered by two CR2016 Batteries.