Hauppauge Computer Works Inc BROADWAY ユーザーズマニュアル
Broadway
Live TV on your iPad, iPhone, Mac or PC
Quick Installation Guide
©2011 Hauppauge Computer Works, Inc. QI-broadway_ver3a Dec. 3, 2011
Hauppauge Computer Works, Inc.
Telephone:631-434-1600
91 Cabot Court
Fax:631-434-3198
Hauppauge, NY 11788
Tech Support:631-434-3197
Web site: www.hauppauge.com
Hours: M-F 9:00AM to 6:30PM EST
Sales: sales@hauppauge.com Tech Support:
techsupport@hauppauge.com
Broadway package contents:
•
Broadway TV receiver
•
Power supply: 12v @2amp
•
Ethernet cable
•
IR blaster cable
•
6 (4 + 2 spare) rubber feet
•
Quick Installation Guide
Welcome!
Thank you for purchasing Broadway. Follow these instructions to quickly start watching TV
on your iPad, PC or any client device in your network.
on your iPad, PC or any client device in your network.
What is Broadway?
Broadway is an ATSC/QAM digital TV receiver which brings live TV to your iPad, iPhone, PC
or Mac or other device (see our website for an up to date list of devices supported).
or Mac or other device (see our website for an up to date list of devices supported).
Broadway connects to your home router via either a wired or wireless connection (Note: dur-
ing Setup of Broadway you must use a wired connection to your router).
ing Setup of Broadway you must use a wired connection to your router).
When you’re at home, you can watch live TV from Broadway over a Wi-Fi connection. When
you travel, your iPad (or other supported device) needs to have an Internet connection (Wi-Fi
or 3G/4G) in order to receive live TV from Broadway.
you travel, your iPad (or other supported device) needs to have an Internet connection (Wi-Fi
or 3G/4G) in order to receive live TV from Broadway.
Broadway needs two things in order to operate:
1.
A connection to a network router in your home: The connection can be wireless (Wi-Fi)
or wired (Ethernet 10/100).
or wired (Ethernet 10/100).
2.
A TV source: The source for live TV can come from your cable or satellite set top box,
an over-the-air TV antenna (ATSC transmissions) or clear QAM digital cable TV (avail-
able in some areas).
an over-the-air TV antenna (ATSC transmissions) or clear QAM digital cable TV (avail-
able in some areas).
The setup of Broadway is done from your iPad, iPhone, PC or Mac. In these instructions, we
talk about the iPad, but these instructions refer to any device which Broadway supports,
such as the iPhone, PC or Mac.
talk about the iPad, but these instructions refer to any device which Broadway supports,
such as the iPhone, PC or Mac.
Additional information on the setup and use of Broadway can be found at:
http://distan.tv/manuals
http://distan.tv/manuals
Broadway Setup
Connect the cables and power supply
Step 1: Connect to your Router
I
mportant: for the initial setup, your Broadway must be connected to your home router
with an Ethernet cable.
with an Ethernet cable.
Use the provided Ethernet cable to connect Broadway to the router of your home network.
I
mportant: Make sure the router is connected to the Internet. As part of the initial
setup, you will need to go through the setup procedure from our website.
setup, you will need to go through the setup procedure from our website.
Step 2: Connect a TV Source
You can connect the following types of TV to Broadway:
-
cable TV or satellite box: use S-Video or
composite video and stereo audio cables
composite video and stereo audio cables
-
cable TV coax cable with clear QAM support
(not available in all areas, so check with your
local cable operator): use the “F” connector on
the back of Broadway
(not available in all areas, so check with your
local cable operator): use the “F” connector on
the back of Broadway
-
ATSC antenna for free HD TV: use the “F”
connector on the back of Broadway
connector on the back of Broadway
-
security camera: use the S-Video or com-
posite video and audio cables
posite video and audio cables
Step 3: Plug in the IR blaster cable (option-
al)
al)
If you are using a cable or satellite box as your TV
source, plug the IR Blaster cable into the back of Broadway.
source, plug the IR Blaster cable into the back of Broadway.
-
Position the IR Blaster over your cable or satellite box IR receiver (usually locat-
ed under a dark plastic window). You might need to use a flashlight to see the IR receiv-
er under the dark plastic window. Sometimes an LED will flash under the plastic windo
when a button is pressed on the remote control for the cable or satellite box.
ed under a dark plastic window). You might need to use a flashlight to see the IR receiv-
er under the dark plastic window. Sometimes an LED will flash under the plastic windo
when a button is pressed on the remote control for the cable or satellite box.
-
Put the IR Receive/Learn sensor in a place where light from your remote control will
be able to “see” it.
be able to “see” it.
Step 4: Connect the power supply and turn on
Connect your Broadway box to a wall socket using the provided power supply unit.
Once connected to power, Broadway starts automatically and the white light on the front will
blink. It will blink for approximate-
ly one minute and then the light
will stay on. Wait until the LED
stops blinking. Once the blinking
has stopped, Broadway is ready
for use.
ly one minute and then the light
will stay on. Wait until the LED
stops blinking. Once the blinking
has stopped, Broadway is ready
for use.
N
ote: if the light contin-
ues to blink, it means
ues to blink, it means
that you have not connect-
ed Broadway to your home router with a wired Ethernet cable. Once you plug in
an Ethernet cable between Broadway and your home router, the blinking will
stop.
ed Broadway to your home router with a wired Ethernet cable. Once you plug in
an Ethernet cable between Broadway and your home router, the blinking will
stop.
Broadway Setup in your home network
Step 5: Go to Distan.TV on your browser to start setup process
N
ote: Make sure your router is connected to the Internet. As part of the initial
setup, you will need to go through
setup, you will need to go through
the setup procedure from our website.
N
ote: for the initial setup, your
Broadway must be connected to
Broadway must be connected to
your home router with an Ethernet
cable.
cable.
N
ote: more information can be found
in the on-line Broadway Users
in the on-line Broadway Users
Guide at: www.hauppauge.com/broad-
way
in the Manuals tab.
way
in the Manuals tab.
Make sure your iPad or PC is connected to
your home network over Wi-Fi or wired.
your home network over Wi-Fi or wired.
Open an Internet browser window. Use Safari on the Apple devices, or any web browser on
a PC.
a PC.
In the address field type (exactly): http://distan.tv
You will see the Broadway login screen. Enter the default Administrator Password: admin
The Broadway Setup Wizard opens.
Step 6: Follow the Broadway Setup Wizard from the Distan.TV website
The Broadway Setup Wizard will guide you through the setup procedure helping you to con-
figure the device connection to the router and run the first channel scan.
figure the device connection to the router and run the first channel scan.
Step 5a: Select the way you want to operate Broadway, wired or wireless
N
ote: for the initial setup, your Broadway must be connected to your home
router with an Ethernet cable.
router with an Ethernet cable.
Select the network connection to Broadway: wired or wireless. Click Next.
Select your TV source. There are three choices:
-
AV-in with connected set top box and IR blaster support: this is used when con-
necting Broadway to a cable TV or satellite set top box
necting Broadway to a cable TV or satellite set top box
-
AV-in with connected camcorder: this can be used if you have a security camera and
want to watch the video via Broadway
want to watch the video via Broadway
-
TV tuner with connected TV antenna or cable: if you are using an antenna or a
direct connection from your cable TV system
direct connection from your cable TV system
You can use the TV tuner and the AV-in at the same time.
Step 6b: Scanning for TV channels (if you have an antenna or clear QAM cable)
If you have chosen ATSC or clearQAM as your TV source, you will now be taken through the
channel scan procedure.
channel scan procedure.
First, make sure the Location is set to your correct country.
Then choose the type of TV you have connected to Broadway. If you connected a cable TV
wire, then select ClearQAM (clearQAM is not available in all areas, so check with your local
wire, then select ClearQAM (clearQAM is not available in all areas, so check with your local
1
2
3
4
5
6